AAton VHR 35 User Manual page 12

From the main menu, use the" Down" key to select the frame sub menu and press the
"Menu" key to enter. You can deactivate the inserted frame by selecting OFF in the line
frame . If you select ON, you have the choice of four different frames labeled frame 1, 2 3
and 4. Each frame will have to be set individually. Use the "Up" and "Down" keys to move
to the line frame color and press the "Menu" key to access the RGB parameters of the
selected frame. Modify the RGB values to have the desired color then press the "Exit" key
to return to the Frame Menu. Use the "Up/Down" keys to select the line "frame top left"
press the "Menu" key to enter and modify the "top and left frame" marking position using
the "Up", "Down", "Left" and "Right" keys. Press the "Exit" key to return to the Frame Menu.
Proceed in the same fashion to modify the position of the "bottom and right lines" of the
frame markings.
With no restriction, the inserted frame can be set in size and position to match the viewing
screen layout but It can also be used to outline an object in the picture during a product
shot.
• The line "Frame move" allows you to position the inserted frame in the picture without
affecting its size. To fill the outside area of the frame with a colored shade, move to the
line edge and press the "Left" or "Right" keys to turn the edge On or Off. If set to On, press
"Exit" to return to the Frame Menu and move to the line edge color to modify the RGB
parameters of the frame outside area. Darkening and brightening this area can be done by
modifying the transparency parameter.
12