SilverStone SST-ECM23 Manual

Warranty Information

This product has a limited 1 year warranty in North America and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized
distributor.
本产品自购买之日起，于中国地区（不包含澳门，香港特别行政区）享有一年有限责任保固（部分产品为二年，
三年或五年）。详细保固年限请参照官方网站 https://silverstonetek.com.cn/ 公布之产品型号为依据。
Warranty terms & conditions
1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology's
jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other
inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc...)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology's maximum liability is limited to the current market value for the
product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not
responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no
circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase,
or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or
incidental or consequential damage whether or not foreseeable and whether or not based on breach of
warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of
such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and
is not transferable to a second hand purchaser.
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty
eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone
authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt;
(ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized
distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the
product back to you after completing the warranty service; (iii) Before you send the product, you must be
issued a Return Merchandise Authorization ("RMA") number from SilverStone. Updated warranty
information will be posted on SilverStone's official website.
Please visit http://www.silverstonetek.com for the latest updates.
Additional info & contacts
For North America
(usasupport@silverstonetek.com)
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not
new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer.
All products should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days,
customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the "USA
RMA form for end-users" form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only
(support@silverstonetek.com)
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Please refer to above "Warranty terms & conditions" for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C.
+ 886-2-8228-1238 (standard international call charges apply)
For Europe (support.eu@silverstonetek.de)
For China (support@silverstonetek.com.cn)
For all other regions (support@silverstonetek.com)
导热贴
导热鳍片
PCB
NO.G11234200
M.2 NVMe SSD to PCIe 3.0 x16
adapter with heatsink
ECM23
Converts one M.2 port (M key) into one PCIe x4 interface Converts one M.2 port (M key) into one PCIe x4 interface
Includes aluminum heatsink and thermal pad for enhanced M.2 SSD cooling Includes aluminum heatsink and thermal pad for enhanced M.2 SSD cooling
Supports 2230,2242,2260 and 2280 length M.2 SSD Supports 2230,2242,2260 and 2280 length M.2 SSD
No driver installation required No driver installation required
Specification
Model No. SST-ECM23
LED indicator PCIe M.2 SSD Read / Write LED: Blue blinking
Interface PCI Express x4 via full size x16 pinout
SSD Interface M.2 (NGFF)
Module Key PCIe x4 NVMe-based M key
Support Length of M.2 SSD 30mm, 42mm, 60mm, 80mm
Operating system support Microsoft Windows 7 (32bit/64bit), 8/8.1/10 (32bit/64bit) or
future release version, Mac OS 10.2.8 or above
Linux
Net weight & Dimension Heatsink with PCB:105mm (W) x 11mm (H) x 44mm (D),52g
Thermal Pad
Thermal conductivity 1.5W/m.k
Operating temperature -40 °C ~ 220 °C
Thermal pad thickness 0.5 / 1 / 1.5 mm
Net weight & Dimension Charcoal Pad：70 mm (W) x 0.5 mm (H) x 20mm (D), 1.95g
Blue Pad ：70 mm (W) x 1 mm (H) x 20mm (D), 3.6g
Gray Pad: 70 mm (W) x 1.5 mm (H) x 20mm (D), 5.5g
Note: ECM23 support 'M' key only, not good for B-Key SATA base M.2 SSD.
Note: If you wish to boot off using M.2 SSD, your motherboard needs to support it. Due to
BIOS limitations, not all motherboards support booting off M.2 SSD so please consult
your motherboard manual or vendor for more details on how to enable this function.
Note : M.2 PCIe-NVMe mode SSD requires the use of Intel® 9 series (Z97 H97 Z170 X99)
or higher version chipset motherboard with Windows 8 or higher version operating
system.

Package Content

ECM23 PCB with heatsink x 1
Screwdriver x 1
Spare outer shell screw x 2
Blue thermal pad x 1
Gray thermal pad x 1
Charcoal Pad x 1