Advertisement
INSTALLATION GUIDE
Switch System
4 Person Workstation
Size: 1800mm
07
Once we get the whole frame ready, ensure the worksurface is
centered over the frame. If you are planning to install a divider
screen, leave a 25mm gap between tables.
Note:
If you are planning to install Pincer Brackets
like the image to the right, you need to attach these
brackets before continuing.
08
Directly screw into table tops, using L-Bracket
screws through each L-Bracket.
www.jasonl.com.au
Need help!
Call us on
1300 527 665
09
25mm
Once we get the whole frame ready, ensure the worksurface is centered
over the frame. and fully tighten all M6x40mm Hex Head to Table Tops,
through each L-Bracket.
Page 5 of 5
Advertisement
