Advertisement
Quick Links
INSTALLATION GUIDE
Switch System
4 Person Workstation
Size: 1800mm
Tools Required: Power screwdriver.
Special Note: No pre-drilled holes or nut inserts are provided.
Wood screws will be required to be drilled directly into underside of desk top.
www.jasonl.com.au
Need help!
Call us on
1300 527 665
Page 1 of 5
Advertisement
Summary of Contents for JasonL Switch System 4 Person Workstation
- Page 1 INSTALLATION GUIDE Switch System Need help! Call us on 4 Person Workstation 1300 527 665 Size: 1800mm Tools Required: Power screwdriver. Special Note: No pre-drilled holes or nut inserts are provided. Wood screws will be required to be drilled directly into underside of desk top.
- Page 2 INSTALLATION GUIDE Switch System Need help! Call us on 4 Person Workstation 1300 527 665 Size: 1800mm COMPONENTS Table Top x4 (1800x800mm) Leg x6 Leg Bracket x6 Beam Bracket x10 T Beam Bracket x2 Short Beam x3 (1225mm) Long Beam x4 (1570mm)
- Page 3 INSTALLATION GUIDE Switch System Need help! Call us on 4 Person Workstation 1300 527 665 Size: 1800mm Join Leg Brackets to each Leg using screws to secure them, as follow. Join 2 L-Bracket through each 1570mm Beam and 1 L-Bracket through each 1225mm Beam.
- Page 4 INSTALLATION GUIDE Switch System Need help! Call us on 4 Person Workstation 1300 527 665 Size: 1800mm Position as presented, and proceed to screw For the 2 central legs, attach as presented, using T Beam Bracket. to ensure each corner of the frame.
-
Page 5: Need Help
INSTALLATION GUIDE Switch System Need help! Call us on 4 Person Workstation 1300 527 665 Size: 1800mm 25mm Once we get the whole frame ready, ensure the worksurface is centered over the frame. If you are planning to install a divider screen, leave a 25mm gap between tables.