Advertisement
Measurement Application (Functions)
• ×1/2 non-tripping test for RCD sensitivity.
• ×1 tripping test of an RCD.
• ×5 fast tripping test of I n×5 time.
• 250mA tripping test of an RCD (maximum tripping time 40ms, for
KMP7020 only)
• AUTO RAMP TEST tripping test for the current value. (KMP7021 only)
Application Standard:
Operational Voltage:
Operating Temperature:
Relative Humidity:
Altitude:
Storage Condition:
Temperature:
Relative Humidity:
Product Size (L x W x D):
Product Net Weight:
MAINTENANCE AND REPAIR
If there appears to be a malfunction during the operation of the meter, the
following steps should be performed in order to isolate the cause of the
problem.
repair of the meter should be performed only by a Factory Authorized Service
Center or by other qualified instrument service personnel. The front panel
and case can be cleaned with a mild solution of detergent and water. Apply
sparingly with a soft cloth and allow to dry completely before using. Do not
use aromatic hydrocarbons or chlorinated solvents for cleaning.
EN 61010-1, CAT III 300V, Pollution degree II,
EN 61557-1, EN 61557-6
IP40 as per EN 60529
230Vac/50Hz (Operating Range: 195 – 253 V)
0°C~40°C(32°F to 104°F)
≤80%RH
≤2000 meter
-20°C~60°C(-4°F to 140°F)
≤75%RH
160 x 101 x71mm (6.3 x 2.77 x 3.94 In)
About 500g(1.1 lb)
9
Advertisement
