Master Keypad Display; Keypads On Individual Energizers - Nemtek MERLIN STEALTH MASTER User Manual

MERLIN STEALTH MASTER
MASTER KEYPAD DISPLAY SUMMARY
Indicator
ON
GOOD
POWER
FENCE
GATE
SERVICE
COMMS
TAMPER
Note ^:
The Master Energizer has Fence Zones 1 and 2 and Gates 1 and 2.
The First Slave has Fence Zones 3 and 4 and Gates 3 and 4.
The Second Slave has Fence Zones 5 and 6 and Gates 5 and 6 etc
Note*:
The Service/Comms/Tamper indicators refer to the actual energizer address
e.g. a lid removed on the second slave would give a TAMPER 3 indication and
not a TAMPER 5 and 6 indication
USING KEYPADS ON INDIVIDUAL ENERGIZERS.
If individual keypads are used on slave energizers, the keypads have full
accessibility to the energizer functions. In certain cases parameters are
written to non-volatile memory. Because this process takes an undefined
amount of time synchronization may be lost if the system is a synchronized
network. The energizer will pulse in a safe mode (low-voltage) until the
Master can detect and re-synchronize the network. This typically takes four or
five seconds.
Please note that the Master Keypad does not work on Slave units.
Refer to the Merlin Stealth User Manual for a description of the keypad
operation.
Lit
At least one energizer on.
Not all energizers in HV
All energizers are in HV
mode
All energizers on. No Not all energizers on. No
alarm condition present alarm condition present
Mains present on all Mains present at some
energizers energizers
NA Fence Alarm# NOTE^
NA
NA
on energizer # NOTE*
Communication Failure
NA
on energizer # NOTE *
NA
on energizer # NOTE*
.
KEYPAD DISPLAY
Flashing
irrespective of voltage
mode
Some alarm condition
No mains present on any
Gate Alarm# NOTE^
Battery Low
No service condition
No communication failure
Tamper Alarm
No energizer lid removed
Off
All energizers off
setting.
present
energizer
No Fence Alarm
No Gate Alarm
condition
.
8