Induro DR HI-HAT Operating Instructions

Multi-Function Spider Casting

The heavy-duty, extra-wide Magnesium Alloy
cross-braced center casting was designed
to provide the greatest core stability for your
Induro Tripod. In addition, there are three
strategically placed dual threaded Accessory
Mounts for convenience and versatility. (3/8"
into the casting with a 3/8 > 1/4 threaded
adapter, covered by a 1/4" screw)
Specifications and design are subject to change without notice.

USER NOTICE

c Do not exceed the maximum specified load
capacity (see specifications on the package
label or visit www.indurogear.com).
c Always ensure that Leg and Head Locks
are tightly engaged before mounting any
gear on your Tripod.
c Do not use any Tripod below temperatures
of −4°F or above +158°F (−20°C / +70°C).
c Always clean and dry any Tripod after it
has been exposed to wet, dusty, sandy
or salty conditions. Your Tripod is not
recommended for use in salt water. If
required, clean tripod using a mild soap
solution applied with a soft cloth, rinse
with fresh water and dry with soft towel.
Remove any dust, dirt or sand from all Leg
Locks, Leg Sections and all moving parts.
c Do not leave any Tripod in the sun
for prolonged periods and avoid high
temperature exposure.
c Avoid leaving any Tripod or Monopod
unattended in areas where people could
trip over the gear and get hurt.
c Remove camera, lens, and all gear from
any tripod when transporting.
c For your safety, don't let your Induro
gear come in contact with any electrical
power source.
D R H - I H A T T / A B

OPERATING INSTRUCTIONS

Thank you for making Induro your choice for
professional photographic gear. Your Induro gear
is manufactured to provide years of dependable
service. In order to obtain optimum satisfaction
and performance we suggest that you carefully
read these instructions and provide them to
anyone who may also use your Induro gear.
L E T O P T R I P O D