Sceptre X46 User Manual page 46

High definition lcd television
Hide thumbs Also See for X46:
Table of Contents

Advertisement

Problems
Solutions
TV CHANNELS ARE
Check your auto lock function's settings inside the OSD. You
BLOCKED
may have locked up some channels but forgot about them.
UNIVERSAL
This TV follows SONY's universal remote code. Please check
REMOTE CODE
your hand book for SONY's codes then apply them.
THE TV TURNS ON
This TV is a High Definition liquid crystal display panel TV. It
OR OFF SLOWLY
requires a few more seconds than normal TVs to power up and
AND THE SCREEN
show the picture.
SHOWS UP
SLOWLY
NO SOUND ON PC Make sure you have a 3.5 mm mini-jack cable connected from
your pc's sound output to the TV's VGA STEREO INPUT.
HDCP VIDEO SAYS
Reboot your HDCP video device but turning them off and
NO HDCP SUPPORT
unplugging the power cord. Wait up to 8 minutes to plug the
power back in to see if it works or not.
Make sure you have a 3.5 mm mini-jack cable connected from
HDCP VIDEO HAS
your HDCP video device's sound output to the TV's VGA
NO AUDIO
STEREO INPUT. If your HDCP video device uses RCA AUDIO
jacks, you'll need to obtain a RCA audio converted into 3.5 mm
mini-jack cable.
CANNOT GET
Make sure the TV is recognized as plug and play monitor. Try
1920X1080 ON PC
updating your video card's drivers as well. If that does not help,
VGA
most likely you'll need to upgrade your video card to a newer
one.
PICTURE IS
This might be from interference from large electrical appliances,
DISTORTED OR
cars, motorcycles, or fluorescent lights. If the TV is close to the
HAS ABNORMAL
wall, try moving the TV to another room in your house to see if
SOUND
the problem still occurs.
If you're using HDMI or a TV digital channel make sure you use
the ASPECT button to switch to 16:9 format. If you are using
VGA, use the AUTO ADJUST function to adjust to the screen.
PICTURE DOES
Please Note : If you are using regular analog TV, AV, or
NOT COVER THE
component in 480i resolution, use the ASPECT button to switch
ENTIRE SCREEN
to 16:9 in order to fill up the screen. Please Note : This note
this feature will distort the picture.
For best image quality, view HD widescreen programs where
possible. If HD content is not available view "Standard
PICTURE QUALITY
Definition" from a digital source. Standard, analog TV will
IS HORRIBLE!!
always be noticeable inferior to HD because your X46 LCD
HDTV has video that is many times better than old TV's and so
you can see interference and deficiencies you did not KNOW
you had.
PICTURE HAS
Your X46 LCD HDTV is manufactured using an extremely high
PIXELS THAT ARE
level of precision technology, however, sometimes some pixels
ALWAYS
of your X46 LCD HDTV may not display. Pixels defects within
DISPLAYING THE
industry specifications are inherent to this type of product and
SAME COLOR
do not constitute a defective product.
I CANNOT CHANGE
Your X46 LCD HDTV syncs time automatically according to
THE TIME
your local TV channel. This function only works while the TV's
MANUALLY
tuner is connected to an ANTENNA.
BIG BLACK BOX IN
You have turned on closed captioning and are using TEXT1 –
THE MIDDLE OF
TEXT4. Change the setting to CC1 or turn off closed captioning
SCREEN
and the box will disappear.
- 46 -
www.SCEPTRE.com
SCEPTRE X46 HDTV User Manual

Advertisement

Table of Contents
loading

Table of Contents