Table of Contents
Advertisement
Rear View Connections
The following descriptions are for connections from left to right.
1.
USB – This port is used for firmware upgrades and also for browsing pictures or playing
MP3 files if you have a USB flash drive.
2.
HDMI1 ~ 4 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD
DVD player, or HD cable / satellite set-top box. This connection port receives pure
digital audio and high definition signal through one single cable. This port also can
accept a HDCP video device for video.
3.
VGA - This connection port connects to a PC for video using VGA cable. Be sure to
connect your audio cable to the VGA Stereo input if you want sound out of VGA video
source.
4.
VGA STEREO INPUT - This connection port is for people who want to provide audio to
the TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack audio
cable.
5.
YPbPr1 – This connection port is for DVD players or satellite / cable set-top boxes that
use component cables. From left to right, connect green, blue, and red for video, and
then connect white for left channel audio, and red for right channel audio.
6.
YPbPr2 – This connection port is for DVD players or satellite / cable set-top boxes that
use component cables. From left to right, connect green, blue, and red for video, and
then connect white for left channel audio, and red for right channel audio.
7.
SPDIF OUT - This connection port is used for sending out digital audio signals to digital
surround sound receivers. The black (OPTICAL SPDIF OUT) connector cover needs to
be pulled out and the port sends out either bit-stream or PCM digital sound signal to a
home theater receiver with digital input.
8.
Headphone – This connection is used for connecting a headphone to the TV.
9.
TV – This connection is for digital or analog cable without the cable box or over-the-
airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital
channels. This connection uses coaxial RF cable. For over-the airwave digital stations
please check http://www.antennaweb.org.
10.
AC IN - This connection is for providing power to the TV.
Please Note:
•
This TV features a power saving function which will turn off the TV automatically
after 5 minutes of idling on a connection with no signal. This feature is present on
all connection.
- 13 -
www.SCEPTRE.com
SCEPTRE X46 HDTV User Manual
Advertisement
Table of Contents
