Cel-Fi GO X Quick Start Guide Smart Signal Booster ™ Cel-Fi GO X is optimized for stationary applications such as buildings, factories, warehouses, and similar. It features 100dB of system gain and provides the largest cellular coverage footprint in its category.
• Equipment will be undamaged by the external formation of ice on the enclosure User Interface Cel-Fi GO X features an LED on the top face to indicate the unit’ s state: MEANING Solid Green The unit is working properly and boosting properly.
EN 301 489-50 v2.2.0 EN 301 908-1 v11.1.1 EN 301 908 v11.1.2 EN 301 908 v11.1.2 EN 300 328 v2.1.1 EN 62311 (2008) Regulation (EC) 1275/2008 (Standby and Off mode) Regulation (EC) 278/2009 (External Power Supply) Cel-Fi GO X: Smart Signal Booster...
Page 4
• Keep Donor and Service Antennas separated/isolated from each other for best performance • Do not use cable splitters for Donor Antennas. • Follow the installation instructions for your chosen antennas. Cel-Fi GO X: Smart Signal Booster...
Page 5
However, a user may manually configure the system’s boost preferences using the Cel-Fi WAVE app. To do this, use the Cel-Fi WAVE app on a smartphone with Bluetooth enabled to connect to the Cel-Fi GO X system, and manage the boost settings.
Solid RED LED Unit is not • Unplug and reinsert power. operational. • If restart has no effect, contact vendor for remedy. Antenna Kitting The following antennas are authorized to be used with Cel-Fi GO X Smart Signal Booster: MODEL DESCRIPTION FREQUENCY...