Page 2
PRODUCT RETURN POLICY This policy covers the return of GENTEC/American Rotary products (excluding warranty returns, which are covered by a separate policy). Under this policy, original Purchaser may return product to GENTEC LLC with its PRIOR APPROVAL*, for credit under the following terms and conditions: Product MUST BE in its original UNOPENED, UNMARKED carton.
Page 3
Key features and accessories about your converter are listed below. KEY FEATURES AND CONSIDERATIONS The American Rotary AMP uses a contactor to interrupt the power from passing through from the single phase utility to the three phase output until power is turned on at the on/off switch of the converter.
Page 4
Warranty is from the date of purchase by the original owner and is non-transferrable. American Rotary will repair or replace (at our option), at no charge, any part(s) found to be faulty during the warranty period specified. The control panel warranty repairs must be performed by/at American Rotary’s facility.
Page 5
STEP TWO: Connect the three phase load using the pre-installed three phase receptacle. If you do not have a male connector plug for this, you can purchase them at American Rotary by calling 888-743-6832. STEP THREE: Turn on the AMP rotary converter by pressing the green START button located on the front of your converter.
Page 6
Technical Questions/Troubleshooting At American Rotary we take great pride in our craftsmanship and we are confident that you will not have any issues with your converter. However, if you do have an issue, we want to hear about it. Many answers to your questions can be found on the American Rotary website at www.americanrotary.com.
Need help?
Do you have a question about the AMP series and is the answer not in the manual?
Questions and answers