Rs232 Interface; Hyperterminal Configuration - Barnstead International MaxQ 4000 Manual

O
PERATION
24
RS232 Interface Port
The RS232 interface port is located on the left side rear
of the shaker cabinet and requires the use of a laptop or
desk top computer running Microsoft Windows 98 or
newer operating system.
Figure 5: RS232 Interface Port

Hyperterminal Configuration

1. Power up the host computer and close any run-
ning applications.
2. Open the HyperTerminal application by clicking
on "Start" \ "Programs" \ "Accessories" \
"Communications" \ "HyperTerminal."
3. In the "Connection Description" box, enter the
name "Max Q Shaker" and choose an icon and
click "OK."
4. In the "Connect To" box, verify that "COM1" is
selected under "Connect Using." Click "OK."
5. In the "COM1 Properties" box \ "Port Settings"
folder select the following options:
Bits per second:
Data bits:
Parity:
Stop bits:
Flow control
After verifying the above settings, click "OK."
6. In the main dialog box click on "File" \ "Save."
7. Exit the program by clicking on "File" \ "Exit" \
"Yes".
19200
8
None
1
None