Environmental Operating Conditions; Declaration Of Conformity - Barnstead International MaxQ 4000 Manual

G S
ENERAL PECIFICATIONS

Environmental Operating Conditions

Pollution Degree**
Installation Category**
Altitude
Relative Humidity
Electrical Supply
Voltage Tolerance
Temperature
Product Usage
**Refer to IEC 664-1

Declaration of Conformity

(for CE models only)
Barnstead International hereby declares under its sole responsibility that this product conforms with the tech-
nical requirements of the following standards:
EMC:
Safety:
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC, as amended by 92/31/EEC and
93/68/EEC, and per the provisions of the Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the European Community is:
Electrothermal Engineering Ltd.
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
Copies of the Declaration of Conformity are available upon request.
10
EN 61000-3-2
EN 61000-3-3
EN 61326-1
EN 61010-1
EN 61010-2-051
2
II
2000 meters MSL (Mean Sea Level)
20% to 80% maximum, non-condensing
120 VAC or 240 VAC
+10% of normal rated line
15°C to 32°C
This product is intended for use indoors only
Caution
It is not recommended to operate shaker in a CO
enriched atmosphere. The formation of carbonic acid
could cause electrical failures.
Limits for harmonic current emissions
Limits for voltage fluctuations and flicker
Electrical equipment for measurement, control, and
laboratory use; Part I: General Requirements
Safety requirements for electrical equipment for
measurement, control, and laboratory use;
Part I: General Requirements
Part II: Particular requirements for laboratory equipment for
mixing and stirring
2