DDMWorks Slingshot Short Throw Shifter Installation Manual

Reduces the amount of forward and side to side movement that is required to shift the transmission into gears

Advertisement

If you have any questions during the installation you can call us at (864) 907-6004 or
email us at Tech@ddmworks.com.

TOOLS NEEDED

3/16" Allen key
Socket wrench
10mm socket
Socket extension
All purpose Grease
5mm Allen key
Paper Towels
119-A Hwy 183
Piedmont, SC 29673
Tech Support
(864) 907-6004
Tech@DDMWorks.com
Slingshot Short Throw Shifter
This short throw shifter kit for the Slingshot
reduces the amount of forward and side to
side movement that is required to shift the
transmission into gears.
Installation time of the short throw shifter
depends on you and your mechanical skills. It
is suggested that you read through the
directions a few times to familiarize yourself
with the components of the kit, and your car.
If you are pretty handy with tools the shifter
can be installed in 30 minutes, however we
suggest that you schedule at least a couple of
hours for the installation.
Page 1
Rev A 2-3-15 ZPS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Slingshot Short Throw Shifter and is the answer not in the manual?

Questions and answers

Summary of Contents for DDMWorks Slingshot Short Throw Shifter

  • Page 1 Slingshot Short Throw Shifter This short throw shifter kit for the Slingshot reduces the amount of forward and side to side movement that is required to shift the transmission into gears. Installation time of the short throw shifter depends on you and your mechanical skills. It...
  • Page 2 Removing the Stock Shifter Mechanism 1. Make sure your Slingshot is in neutral and the parking brake is on before starting installation. 2. The first step is to pull on the outer edge of the shift boot, in order to gain access underneath it. To do this pull up and to- wards the shifter to pull the boot up and off the plastic trim.
  • Page 3 Installing the DDMWorks short shifter 1. When you removed the stock shifter from the car, there should be a small black spring that stayed in the bottom of the cavity that the stock shifter is in, just make sure it is flat to install the next piece.
  • Page 4 Congratulations! You have finished the install. All of us here at DDMWorks thank you for your purchase and hope you enjoy your new short shifter. Small boot installed and ready to install the If you have any questions feel free to give us a call or text us at shifter back on the car.

Table of Contents