Salt Dogg 1400455SS Installation Manual

Stainless Steel
Self-Contained Hopper Spreaders

Table of Contents

Warranty Information .................................................. 1
General Information ................................................. 1-2
Safety Precautions ..................................................... 2
General Installation .................................................. 2-3
Installation Instructions - Gas Models ..................... 3-4
Chute Installation ........................................................ 5
Spreader Operation - Gas Models .......................... 4-5
- Hydraulic Models ................. 6-7
Chute Operation ......................................................5-6
Spreader Maintenance ............................................ 7-9
Optional Equipment .................................................... 9
Repair Parts & Drawings ......................................10-16
SPREADER WARRANTY INFORMATION
This warranty replaces all previous warranties and no employee of this
company is authorized to extend additional warranties, or agreements, or
implications not explicitly covered herein.
Buyers Products Company warrants all parts of the product to be free from
defects in material and workmanship for a period of one (1) year, excluding
the gasoline engine, from the date of installation. Parts must be properly
installed and used under normal conditions. Normal wear is excluded.
Any part which has been altered, including modifications, misuse, accident,
or lack of maintenance will not be considered under this warranty.
The sole responsibility of Buyers Products Company under this warranty is
limited to repairing or replacing any part(s) which are returned, prepaid, 30
days after such defect is discovered, and returned part(s) are found to be
defective by Buyers Products Company.
Authorization from Buyers Products Company must be obtained before
returning any part. The following information must accompany defective
parts returned to Buyers Products Company: RMA#, spreader model, serial
number, date installed, and distributor from whom purchased.
Buyers Products Company shall not be liable for damage arising out of
failure of any unit to operate properly, or failure, or delay in work, or for any
consequential damages. No charges for transportation or labor performed
on any part will be allowed under this warranty.
The gasoline engine is solely warranted through engine's manufacturer. All
engine related warranty claims are to be processed through the engine's
manufacturer. This information is explained in the engine owner's manual.
Installation Manual
- Hydraulic Models ............... 6
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • saltdogg.com
Spreader Models and Specifications
HOPPER
MODEL # POWER LENGTH
1400455SS
Gas 96"
1400460SS
Gas 108"
1400465SS Gas 120"
1400475SS Gas 96"
1400475SSH Hydraulic 96"
1400500SS Gas 108"
1400500SSH
Hydraulic 108"
1400550SS
Gas 120"
1400550SSH Hydraulic 120"
General Information
1. Recommended Vehicle Requirements:
This spreader is to be used on trucks with dump
bodies or flat bed trucks with a Gross Vehicle Weight
Rated chassis of 15,000 lbs. or greater.
Do not overload vehicle beyond the vehicle's Gross
Vehicle Weight Rating (GVWR) or Gross Axle Weight
Ratings (GAWR). Check the vehicle's load rating cer-
tification sticker for maximum vehicle capacity.
2. Average Material Weights:
MATERIAL
#1 Rock Salt
#2 Rock Salt
Coarse Sand - Dry
Coarse Sand - Wet
1
9049 Tyler Blvd. • Mentor, Ohio 44060
OVERALL OVERALL EMPTY
LENGTH WIDTH WEIGHT
115.9" 58" 1,395 lbs.
127.9" 58" 1,460 lbs.
138.9" 58" 1,526 lbs.
116" 70" 1,470 lbs.
116" 70" 1,405 lbs.
128" 70" 1,500 lbs.
128" 70" 1,435 lbs.
140" 70" 1,560 lbs.
140" 70" 1,500 lbs.
CAUTION
WEIGHT (POUNDS PER CUBIC YARD)
950
1,215
2,565
3,240
CAPACITY
2.5 yds.
2.75 yds.
3.0 yds.
3.0 yds.
3.0 yds.
4.0 yds.
4.0 yds.
4.5 yds.
4.5 yds.