Page 1
GALLUS 2100 TCE Installation Guide Please look at our homepage www.flonidan.dk that you have the newest version of the document. Gallus 2100 TCE Installation guide M/04110XX-000/1 Rev. 260505 FLONIDAN ISLANDSVEJ 29 DK-8700 HORSENS TEL.: +45 75 61 88 88 WWW.FLONIDAN.DK...
Page 2
GALLUS 2100 TCE Installation Guide 1.0 General 1.1 Introduction Gallus 2100 TCE is an electronic, temperature compensated diaphragm meter, available as mono or two pipes, from Q 2.5 to 6 m max. The meter is prepared for AMR - Automatic Meter Reading Gallus 2100 will read out the accumulated consumption preferable as Nm3, Sm3, kWh or MJ, as per choice depending on the customized configuration.
Page 3
Important: Gallus 2100 TCE is a high accuracy measuring instrument, that must be handled with care. The meter should always be kept in horizontal position, in service and during transportation.
Page 4
GALLUS 2100 TCE Installation Guide Fig. 2. The interior of the Gallus 2100 TCE When removing the cover, access is obtained to battery compartment and option board compartment. When installing option board, the following connections are available: - Pulse output 1...