Commissioning The Juwel Smartfeed Automatic Feeder; Feed Chamber Enlargement; "Er" Display Message - JUWEL Aquarium SmartFeed Instruction Manual

Commissioning the JUWEL SmartFeed automatic feeder

1. Switch on the SmartFeed automatic feeder with the On/Off key.
TIPP
If the automatic feeder is switched off, no functions are active.

Feed chamber enlargement

Enlarge the feed volume with the included attachment. Please follow the instructions of
the feed producer for correct dispensing.
TIPP
Please cut up flake food that is too large before filling the automatic feeder, as it may otherwise block the conveyor screw.

"Er" display message

If a mechanical problem occurs, the automatic feeder reacts (after 10 seconds) by
switching itself off ("Er" display message).
Check the dosage screw for large feed quantities or foreign objects, which may be
blocking it. After troubleshooting, perform a restart with the On/Off key.
1.
6