Spektrum Team SPMVC623 Instruction Manual

Instruction Manual
Bedienungsanleitung
Manuel d'utilisation
Manuale di istruzioni
IMPORTANT: Consult local laws and ordinances
Team Spektrum™ FPV Edition
before operating FPV (first person view) equipment.
In some areas, FPV operation may be limited or
Micro Swift 2 FPV Camera
prohibited. You are responsible for operating this
with OSD SPMVC623
product in a legal and responsible manner.
EN
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole
discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click
on the support tab for this product.
Meaning of Special Language
The following terms are used throughout the product literature to indicate various levels of potential
harm when operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property damage,
collateral damage, and serious injury OR create a high probability of superficial injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property
damage AND a possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage
AND a little or no possibility of injury.
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the
product before operating. Failure to operate the product correctly can result in damage to
the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and
requires some basic mechanical ability. Failure to operate this Product in a safe and responsible
manner could result in injury or damage to the product or other property. This product is not
intended for use by children without direct adult supervision. Do not attempt disassembly, use with
incompatible components or augment product in any way without the approval of Horizon Hobby,
LLC. This manual contains instructions for safety, operation and maintenance. It is essential to
read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in
order to operate correctly and avoid damage or serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled
vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will not
provide warranty service related thereto.
WARRANTY REGISTRATION
Visit www.spektrumrc.com/registration today to register your product.
Specifications
MODEL SPMVC623
Image Sensor 1/3" Sony Super HAD II CCD
Horizontal Resolution 600TVL
Lens SETUP EXPOSURE 2.3mm
Signal NTSC
EXPOSURE SHUTTER
Input Voltage DC 5V–36V
BACKLIGHT OFF BRIGHTNESS
WHITE BALANCE ATW1 AGC
Integrated features OSD
DAY&NIGHT COLOR DWDR
OSD Features Voltage, Timer, Callsign Team Spektrum Edition
IMAGE ADJ. RETURN
Micro Swift 2
Minimum Illumination 0.01 Lux @1.2F
DPC
Day/Night Color/Auto/B&W
LANGUAGE ENGLISH
RESET
Electronic Shutter Speed 1/60 –100,000
EXIT
Dimensions 19mm x 19mm x 19mm
Power Consumption 60mA @ 5V, 140mAh @ 12V
Weight 5.6 grams
SETUP BLC
Recommended Video Transmitter SPMVT1000, SPMVTM150
EXPOSURE AREA SEL.
BOX CONTENTS
BACKLIGHT BLC AREA STATE
WHITE BALANCE ATW1
• Team Spektrum FPV Edition Micro Swift 2 Camera GAIN
DAY&NIGHT COLOR HEIGHT
• Video Cables (2)
IMAGE ADJ. WIDTH
• OSD Switch Board and Extension Cable
DPC LEFT/RIGHT
• Camera Mount
LANGUAGE ENGLISH TOP/BOTTOM
• Small Hardware (2x4mm machine screws, 2mm self taping screws)
RESET
RETURN
EXIT
12mm 19mm
SETUP WB MANUAL
EXPOSURE COLOR TEMP
BACKLIGHT OFF BLUE
WHITE BALANCE MANUAL RED
DAY&NIGHT COLOR RETURN
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
2mm thread 8mm
RESET 10mm
EXIT
CAMERA TO VIDEO TRANSMITTER CONNECTION
SETUP D&N AUTO
There are two harness options included with
the camera.
EXPOSURE D->N LEVEL
1. A basic 3-pin video cable is included for
BACKLIGHT OFF D->N DELAY
simple connections. Plug the cable into the
WHITE BALANCE ATW1 N->D LEVEL
DAY&NIGHT far side of the connector closest to the case and connect it to AUTO N->D DELAY
IMAGE ADJ. RETURN
the SPMVTM150 for a solder free connection.
DPC
2. An advanced 4-pin harness is also included that has and extra
Team Spektrum Edition
LANGUAGE ENGLISH
wire for voltage detection.
Micro Swift 2
RESET
3. Connect the VBAT wire to the positive wire on the power supply
EXIT
for the OSD voltage reading.
4. Connect the OSD extension cable for easy access to the camera settings.
SETUP IMAGE ADJ.
ADVANCED CAMERA TO VIDEO TRANSMITTER CONNECTION
4-Pin Harness
• VBAT+ (Blue)
• Video out (Yellow)
• Ground wire (Black)
• DC 5–36V in (Red)
Camera Back
Team Spektrum Edition
Micro Swift 2
CAMERA-OSD SWITCH CONNECTION
The camera's built-in OSD and camera functions can be controlled by the OSD switch board. An
extension is provided to make remote access to the OSD switch board easier.
OSD Extension
Team Spektrum Edition
Micro Swift 2
Camera Back
CAMERA MOUNTING
1. Use the 2x4mm self tapping screws to secure the camera mount to the airframe.
Team Spektrum Edition
2. Apply a small amount of thread lock to the 2x4mm machine screws and secure the camera
Micro Swift 2
to the camera mount at the preferred angle.
OSD MENU
Quick Settings:
Long Press UP Button: Press for three seconds to access the settings for the OSD screen.
Long Press LEFT Button: Press for three seconds to calibrate the voltage. When the voltage text
flashes, press UP or DOWN buttons to make adjustments to the displayed value.
Long Press DOWN Button: Press for five seconds to reset the OSD settings to default.
Long Press RIGHT Button: Press for three seconds to switch between camera presets.
1. Press the middle button to change the selec-
tion ON or OFF, then move to POS to enter the
AUTO
position adjustment.
CLR
050
2. Press up/down, left or right to navigate the ALARM
----
SCENE
menu. Press up/down to change the display
OFF
SYSTEM
location when the cursor is on a POS selection.
RET
PILOT
CLR: Clear the ID field.
TIMER
Alarm: Low voltage alarm trigger point. Set this
VOLTAGE
value to the voltage the OSD should trigger the
HORIZON
low voltage warning.
EXIT
SCENE: This selection offers the following
settings; Personal, Lightrax Outdoor, Indoor, Cloudy, Twilight. Hold the right button down at any time
HLC
when not in the menu to cycle through the Scene options without having to enter the menu.
SYSTEM: Displays whether the camera is operating in NTSC or PAL mode.
AREA1 LEVEL 200
PILOT: Activate or disable the pilot ID. When active the pilot ID is displayed on-screen during operation.
ON RETURN RET
TIMER: Activate or disable the timer. When active the timer begins the counting at power up
168
005 on-screen. When disabled the Timer is not displayed on-screen.
005
VOLTAGE: Activate or disable the timer. When active the battery voltage is displayed on-screen.
Team Spektrum Edition
004
HORIZON: Activate or disable a horizontal reference line, which some pilots prefer to use to help
Micro Swift 2
004
align the flight path.
RET
EXIT: Select this option to exit the menu.
CAMERA MENU
1. Press the middle button on the OSD Switch Board to access the main camera menu, then
MANUAL
move to POS to enter the position adjustment.
045
2. Press up/down, left or right to navigate the menu. Press up/down to change values when the
064
cursor is on a POS selection.
RET
3. Select Return to back out of a sub-menu to the main menu.
SETUP
EXPOSURE
BACKLIGHT
WHITE BALANCE
DAY&NIGHT
D&N B/W IR SMART
IMAGE ADJ.
144 BURST OFF IRGAIN
DPC
3 SEC IR SMART ON LANGUAGE HEIGHT
112 IR LEVEL HIGH WIDTH
RESET
1 SEC RETURN RET EXIT LEFT/RIGHT
RET TOP/BOTTOM
RETURN
SETUP
EXPOSURE
BACKLIGHT
WHITE BALANCE
LENS SHAD. FONT COLOR
DAY&NIGHT
RESET
EXIT
RESET, EXIT
• Select Reset to change all camera settings
SETUP
back to factory default.
OSD Extension • Exit Saves settings and returns to normal
EXPOSURE
BACKLIGHT camera operation OFF
UP
WHITE BALANCE ATW1
DAY&NIGHT COLOR
LEFT RIGHT
IMAGE ADJ. AUTO
MENU
DPC
LANGUAGE ENGLISH
DOWN
RESET
EXIT
What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that
the product purchased (the "Product") will be free from defects in materials and workmanship for
a period of 1 year from the date of purchase.
What is Not Covered - This warranty is not transferable and does not cover (i) cosmetic damage,
(ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due
to improper use, installation, operation or maintenance, (iii) modification of or to any part of the
Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v)
Product not purchased from an authorized Horizon dealer, (vi) Product not compliant with applicable
UP
technical regulations, or (vii) use that violates any applicable laws, rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR
LEFT RIGHT
REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT
MENU
LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED
DOWN
THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER'S INTENDED USE.
Purchaser's Remedy - Horizon's sole obligation and purchaser's sole and exclusive remedy shall
OSD Switch Board
be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon
to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty
claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase
is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability - HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY,
REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE,
STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual
price of the Product on which liability is asserted. As Horizon has no control over use, setup, final
assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or
injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser
or user are not prepared to accept the liability associated with the use of the Product, purchaser is
advised to return the Product immediately in new and unused condition to the place of purchase.
Law - These terms are governed by Illinois law (without regard to conflict of law principals). This
warranty gives you specific legal rights, and you may also have other rights which vary from state to
1234567890ABC
state. Horizon reserves the right to change or modify this warranty at any time without notice.
DEFGHIJKLMNOPQ
RSTUVWXYZ=/&:. WARRANTY SERVICES
SPEKTRUM Questions, Assistance, and Services - Your local hobby store and/or place of purchase cannot provide
:14.8V
warranty support or service. Once assembly, setup or use of the Product has been started, you must
:PERSONAL
contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions
:ON POS
and service you in the event that you may need any assistance. For questions or assistance, please visit
:ON POS
our website at horizonhobby.com, submit an inquiry to productsupport@horizonhobby.com or call the
:ON POS
toll-free telephone number referenced in the Warranty and Service Contact Information section to speak
:ON POS
with a Product Support representative.
:OFF POS
Inspection or Services - If this Product needs to be inspected or serviced and is compliant in the
country you live and use the Product in, please use the Horizon Online Service Request submission
process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA)
number. Pack the Product securely using a shipping carton. Please note that original boxes may
UP
be included, but are not designed to withstand the rigors of shipping without additional protection.
Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not
LEFT RIGHT
MENU responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request
is available at http://www.horizonhobby.com/content/service-center_render-service-center. If you
do not have internet access, please contact Horizon Product Support to obtain a RMA number along
DOWN
with instructions for submitting your product for service. When calling Horizon, you will be asked
to provide your complete name, street address, email address and phone number where you can
be reached during business hours. When sending product into Horizon, please include your RMA
number, a list of the included items, and a brief summary of the problem. A copy of your original
sales receipt must be included for warranty consideration. Be sure your name, address, and RMA
number are clearly written on the outside of the shipping carton.
Provided warranty conditions have been met, your Product will be serviced or replaced free of charge.
Service or replacement decisions are at the sole discretion of Horizon.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please
contact the appropriate Horizon Product Support office. Warranty Requirements - For Warranty
consideration, you must include your original sales receipt verifying the proof-of-purchase date.
Non-Warranty Service - EXPOSURE
Should your service not be covered by warranty, service will be completed and payment will be
SHUTTER
required without notification or estimate of the expense unless the expense exceeds 50% of the
OFF BRIGHTNESS
retail purchase cost. By submitting the item for service you are agreeing to payment of the service
ATW1 AGC
without notification. Service estimates are available upon request. You must include this request
COLOR DWDR
with your item submitted for service. Non-warranty service estimates will be billed a minimum of RETURN
066
½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and
ENGLISH 006
cashier's checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting
016
any item to Horizon for service, you are agreeing to Horizon's Terms and Conditions found on our
001
website http://www.horizonhobby.com/content/service-center_render-service-center.
004
RET
ATTENTION: Horizon service is limited to Product compliant in the country of use and
ownership. If received, a non-compliant Product will not be serviced. Further, the sender will
BLC
be responsible for arranging return shipment of the un-serviced Product, through a carrier of
AREA SEL. AREA1
the sender's choice and at the sender's expense. Horizon will hold non-compliant Product for
BLC AREA STATE
a period of 60 days from notification, after which it will be discarded.
ATW1 GAIN
COLOR HEIGHT
Country of
SETUP SETUP
Purchase
EXPOSURE EXPOSURE
BACKLIGHT OFF BACKLIGHT
WHITE BALANCE ATW1 WHITE BALANCE
DAY&NIGHT COLOR DAY&NIGHT
United States of
IMAGE ADJ. IMAGE ADJ.
America
DPC DPC
LANGUAGE ENGLISH LANGUAGE
RESET RESET
EXIT EXIT
LIMITED WARRANTY
EU
Compliance Information for the European Union
A copy of the EU Declaration of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance.
Instructions for disposal of WEEE by users in the European Union
disposal service or where you purchased the product.
DEFGHIJKLMNOPQ
RSTUVWXYZ=/&:.
AUTO
CLR
050
ALARM
----
SCENE
OFF
SYSTEM
RET
PILOT
TIMER
VOLTAGE
HORIZON
EXIT
HLC
LEVEL 200
ON RETURN RET
5-14-2015
168
005
WARRANTY AND SERVICE CONTACT INFORMATION
Horizon Hobby Contact Information Address
Horizon Service Center
servicecenter.horizonhobby.
(Repairs and Repair OFF
com/RequestForm/
Requests)
ATW1
COLOR
4105 Fieldstone Rd
productsupport@
Horizon Product Support
Champaign, Illinois, 61822
horizonhobby.com.
(Product Technical
USA
Assistance)
877-504-0233
ENGLISH
websales@horizonhobby.com
Sales
800-338-4639
Horizon Technischer Service service@horizonhobby.eu Hanskampring 9
D 22885 Barsbüttel,
Sales: Horizon Hobby GmbH +49 (0) 4121 2655 100
Germany
EU Compliance Statement: Horizon Hobby, LLC hereby declares that this product is
in compliance with the essential requirements and other relevant provisions of the EMC
Directive.
This product must not be disposed of with other waste. Instead, it is the user's responsi-
bility to dispose of their waste equipment by handing it over to a designated collections
point for the recycling of waste electrical and electronic equipment. The separate collec-
tion and recycling of your waste equipment at the time of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that protects human health
and the environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household waste
1234567890ABC
SPEKTRUM
:14.8V
:PERSONAL
:ON POS
:ON POS
:ON POS
:ON POS
:OFF POS