Table of Contents
Advertisement
Installation guide
HBSR is installed on a pipe socket depending on the type of thread on the sensor. Sensors with NPT"/BSPT"
are sealed with Teflon tape or liquid gasket. For other thread types, solid gasket is used.
To install the HBSR sensor, a 2.5 mm Allen key, shifting
spanner, and gasket must be used.
Separate the electronic part from the mechanical part.
Instruction manual - HBSR – Refrigeration Switch (HBSR-003-UK)
WE INCREASE
UPTIME
AND
EFFICIENCY
IN THE REFRIGERATION INDUSTRY
Loosen the two set screws.
Apply liquid gasket on sensors with a conical thread, and
solid gasket to sensors with a cylindrical thread.
8 / 12
Advertisement
Table of Contents
