Related Manuals for George's 650W
Summary of Contents for George's 650W
- Page 1 CYCLONE WALL FANS Model Numbers: 650W, 750W INSTRUCTION MANUAL SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
- Page 2 OPERATING INSTRUCTIONS Packaging Please DO NOT dispose of any packaging until you have checked the appliance is operational. After removing the packaging ensure the contents are intact and complete. In the unlikely event of missing part, contact your retailer. DO NOT leave children unattended with any oft he packaging since it is a potential source of danger.
- Page 3 GENERAL INFORMATION WARNING -to reduce the risk of fire, electrical shock or injury to persons or property: 1. Always operate the product from a power source of the same voltage, frequency and rating as indicated on the product identification plate. 2.
- Page 4 INTRODUCTION AND SPECIFICATION The Cyclone wall mounted fans are designed for use in a wide variety of industrial, commercial and agricultural applications. Whether it is for industrial warehousing, gymnasiums, factories, marquees or workshop applications, or comfort cooling within agricultural buildings for livestock, Cyclone Wall mounted fans provide powerful, cool, yet effective, positive air movement, there by improving the environmental conditions for both humans and animals.
- Page 5 Operation Upon receipt, the fan equipment should be visually inspected to check for any damage. Check the details on the motor rating plate to ensure that the correct power supply (voltage, frequency and phase) is available. An incorrect power supply will lead to permanent damage to the fan motor. Wall fan –...
- Page 6 Start-up WARNING The fan must be isolated from the power supply before adjusting any operating conditions apart from altering the fan speed. The angle of tilt of the fan motor axis must not exceed 30 Degrees from the horizontal to avoid straining the oscillation mechanism. Before power is supplied to the unit, ensure that the impeller is free to rotate.
- Page 7 GENERAL MAINTENANCE Inspect ion of fan at least once every 12 months is recommended to ensure that the motor, fan blades, and supporting guards, are clean. Any build up of dust and deposits on the blades guards should be removed using a non-abrasive cleaner. All fastenings should be checked for tightness.
- Page 8 WARRANTY ONE (1) YEAR LIMITED WARRANTY Retain this warranty information George’s Industrial Services undertakes to replace or repair at its discretion goods (excluding batteries) should they become defective within one year solely as a result of faulty materials & workmanship. If the product has been: used inappropriately;...
Need help?
Do you have a question about the 650W and is the answer not in the manual?
Questions and answers