Download Print this page

Redback A 2706E Manual page 3

Am/fm tuner & cd/sd/usb audio player

Advertisement

REDBACK
®
AM/FM TUNER & CD/MP3 DISC PLAYER
Specifications
Tuner
Radio Broadcast: ..............................................................................FM 87.5 MHz – 108 MHz / AM 522 kHz – 1620 kHz
Radio Memories: ....................................................................................................................................FM x 60/ AM x 40
Output: ..............................................................................................................................................................1.2V ± 2dB
CD Player
Frequency Response CD: ................................................................................................................20Hz – 20kHz ± 3 dB
Output Level: ............................................................................................................................1.2V ± 2 dB ( 1kHz / 0 dB )
S/N Ratio: ................................................................................................................................................More then 80 dB
Overall specifications
Supply Voltage: ....................................................................................................................................................240V a.c.
Dimensions (mm): ................................................................................................430W x 44H x 250D (without rack ears)
Remote Control Range: ................................................................................................................3m (optimal), 5m (max)
For repair or service please contact your place of purchase.
Note: Under no circumstances should you attempt to repair the player yourself or via a non-authorised Altronics ser-
vice centre as this will invalidate the warranty! During the warranty period, we undertake to repair or replace your
product at no charge if found to be defective due to a manufacturing fault. The warranty excludes damage by misuse,
neglect, shipping accident, incorrect installation or no fault found.
NOT FIELD SERVICEABLE.
Distributed by Altronic Distributors Pty. Ltd. Perth. Western Australia.
Phone: 1300 780 999 Fax: 1300 790 999 Internet: www.altronics.com.au
Page 6
REDBACK
REDBACK
®
AM/FM TUNER & CD/SD/USB AUDIO PLAYER
®
AM/FM TUNER & CD/MP3 DISC PLAYER
Operation
POWER ON/OFF: The unit has a main power switch. When the main power is switched on, both LCD
displays will light up.
RADIO:
1. Press the BAND button (on either the unit, see Fig.1, or the remote, see Fig. 3) to select between FM or
AM.
2. Press the DOWN or UP (on either the unit, see Fig.1, or the remote, see Fig. 3) buttons to tune in to the
desired station.
3. To automatically scan for stations, press and hold the UP or DOWN buttons for a second. The unit will
scan and stop when it reaches a station.
4. To store current station to memory, tune to the station desired - press the memory button, select preset 1
to 5, or to access presets higher presets press 1-5, then press +5 to reach the desired preset number (eg.
for 16 press 1, then press +5 three times. If you are using the remote, you can use buttons 1-9 and +10.
Then press the memory button again. You can store up to 60 FM stations and 40 AM stations.
5. Access preset stations using the number keys and +5 (on the unit, see Fig.3) or +10 (on the remote, see
Fig.1). Me-Up and Me-Down (M-UP and M-Down on the remote) are used to skip up or down to the
next station preset.
AUDIO PLAYER:
CD OPERATION - COMPACT DISCS
The CD player accepts both 12CM and 8CM compact discs. Insert a disc into the slot with the data side
facing down, and press the play button (on either the unit, see Fig.1, or the remote, see Fig. 3) to begin
playback. Use the CD/TUNER button on the remote control (see Fig.3) to switch to CD/USB/Card Mode.
The CD on indicator LED will light up and the display panel will display CD and the Track number and
playing time.
Warning: When inserting a disk into the CD player or taking a disc out, it is necessary to let the CD
player insert the disk and return automatically. Do not force the disc in or out of the disc slot as this
may cause serious damage to the unit.
• If the unit does not accept a CD, check that Card or USB modes are not selected. Press the FUNC (on
either the unit, see Fig.1, or the remote, see Fig. 3) button until CD displays. Press PLAY in order for the
unit to load and recognise the CD.
• If the unit does not eject a CD, check that Card or USB modes are not selected. Press FUNC button until
CD displays. Press PLAY in order for the unit to load and recognise the CD, then STOP/EJECT. The CD
will now eject.
STOP and EJECT: Press STOP on the front panel (see Fig.1) once to stop playback. The display will show
total track numbers and total time. Press EJECT and the disc will eject.
REPEAT: Press REPEAT (on either the unit, see Fig.1, or the remote, see Fig. 3) to repeat playing the cur-
rent track only. Press repeat a second time to repeat all the tracks. Press repeat a third time to repeat all
tracks in random. Pressing a fourth time returns to the normal play all mode.
PLAY/PAUSE: (On either the unit, see Fig.1, or the remote, see Fig. 3) Press to pause playback, press again
to resume playback.
REV-SKIP-CUE: Press the REV and SKIP buttons (on either the unit, see Fig.1, or the remote, see Fig. 3) to
skip 1 track forwards or backwards.
A-B: This function allows a selected section of music source to be continually repeated. Press A-B (on
either the unit, see Fig.1, or the remote, see Fig. 3) once to select the start position. The display will show A
and B will be flashing. Press again at the desired end position. The display will now show AB and the
selected music source selection will be continually repeated. Press A-B again will cancel repeat function.
Page 3

Advertisement

loading