Phonak Roger 17 Fittings Manual page 4

Listening check
Roger 17 listening check with the
Naída CI Listening Check
Place the Naída CI Listening check
between the processor and the
PowerCell 170 and plug headphones
into the socket for listening to both, the
microphone and the Roger signal
Special features for educational system
Programming of EasyGain
If the volume of the Roger system is not satisfactory, you can change the gain of the receiver via Roger inspiro.
Hold Roger inspiro close to Roger receiver (less than 10 cm/4 inches) and press Check.
Roger receiver information will appear on the Roger inspiro's screen.
Press Manage, scroll with the cursor to EasyGain and press OK.
Now you can change the gain of the receiver in the range of -8 to +8 dB.
4
Available for Roger 17 (02) and Roger X (02) only
Listening option
MLx Audio Checker with Roger 17 Adapter
and Roger 17
Roger 17 plugged into the Roger 17 Adapter
4
Fitting Guide | Roger and Advanced Bionics sound processors Naída CI, Auria and Harmony
MLx Audio Checker
and Roger X
Roger X plugged directly into the
MLx Audio Checker
4