Page 1
Advanced Bionics Advanced Bionics Naída CI Q70 Naída CI Harmony™ / Auria™ Roger 17 ComPilot + Roger X iConnect™ + Roger X Receiver + Adapter Roger X is not compatible with the Advanced Bionics (AB) Neptune™ sound processor. Jace Wolfe (2013), Evaluation of speech recognition of cochlear implant recipients using a personal digital adaptive radio frequency system.
AB Harmony™ / Auria™ Set the Audio Mixing Ratio (Mic/Aux) to 50/50 For Roger 17, no pre-programming is required. For Roger X when used with ComPilot, no pre-programming is required but might be done to deactivate the AutoConnect tones .
Step 4: Test the system Consider testing the user’s speech recognition in quiet with the your patient. Then test the user’s speech recognition through CI alone by muting the Roger microphone and standing close to the Roger microphone while standing at least 3 meters away. Using Roger via the T-Coil Alternatively, the receiver Roger MyLink can be used after activating the T-Coil on the sound processor.
Page 4
Now you can change the gain of the receiver in the range of -8 to +8 dB. Available for Roger 17 (02) and Roger X (02) only Fitting Guide | Roger and Advanced Bionics sound processors Naída CI, Auria and Harmony...
This manual is also suitable for:
Advanced bionics naida ci q70Advanced bionics naida ciAdvanced bionics harmonyCompilot + roger xIconnect + roger xAdvanced bionics auria