Rugged Ridge 11252.51 Installation Instructions

PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL THIS PRODUCT
Kit Includes: (2) Hood Lift Strut
(2) Ball Stud
(2) L Bracket w/Ball Stud
(4) Sheet Metal Screw
(4) Star Washer
Step 1: Locate the factory hole in the vertical brackets coming from the firewall.
Step 2: Beginning with the passenger side, open the factory hole to 5/16". (Fig.1)
Step 3: To prevent corrosion, cover exposed metal from drilling with paint. (Fig.2)
Step 4: Install a ball stud and nylock nut and tighten. (Fig.4, 5 & 6)
Installation Instructions
11252.51
Hood Lift JK Wrangler 07 and up
DRILLING REQUIRED
(
Fig.1)
(Fig.4)
- { PAGE } -
(Fig.2)
(Fig.5) (Fig.6)