INSTALLATION SCHEMATIC / WIRING DIAGRAM CONTROL & POWER INPUT’ TECHNICAL SPECIFICATION TECHNICAL DRAWING WIRING CHART EQUIPMENT LIMITATION TESTING OF THE LIGHT BEFORE INSTALLATION CARE AND CLEANING OF YOUR AVEO ENGINEERING AVIATION LIGHTS NOTES ON INSTALLATION CONTINUED AIRWORTHINESS INFORMATION _______________________________________________________________________________________________________________________ Page 2 of 10...
0.3 Amendment Record procedure The master copy of this document shall be kept electronically as a read only document under the control of Aveo Engineering Group, s.r.o. as Master Copy. ALL amendments to this manual will initiate a raise of Issue ALL raises of issue will be given a sequential Alphabetic Issue Ident sequentially from 01 to 99 in Table 01 - Issue No: Column–...
0.5 Distribution List As stated in 0.3 above; the master copy of this document shall be kept electronically as a read only document under the control of Aveo Engineering Group, s.r.o. as Master Copy. All holders of copies of this Document will be recorded by listing in Table 02 –...
Installation Manual Nebulon AVE-WP-51G-IM Issue 03 Nebulon™ Nebulon™ is a LED position light assembly E TSO Compliant red and green position lights, drag profile designed aircraft wing position light. This powerful lighting system features easy installation, fail safe system, unbreakable construction, waterproof and high candela output List of the major components (by part number) that make up the equipment complying with the standards prescribed in ETSO.
Installation Manual Nebulon AVE-WP-51G-IM Issue 03 INSTALLATION SCHEMATIC / WIRING DIAGRAM CONTROL & POWER INPUT’s: POSITIVE POLE Positive POS/NAV power supply line GND POLE Negative common power supply line (ground) TECHNICAL SPECIFICATION Dimensions (mm): 48 x 54 x 70 Dimensions (inches): 1.89”...
Installation Manual Nebulon AVE-WP-51G-IM Issue 03 EQUIPMENT LIMITATION Nebulon™ should only be powered by 18-36 Vdc, typically a 24 volt aircraft battery. TESTING OF THE LIGHT BEFORE INSTALLATION All Aveo Aviation lights undergo rigorous testing prior to being released from our engineering manufacturing department.
12. CONTINUED AIRWORTHINESS INFORMATION This product is delivered with EASA Form1 which is for the operator to report any occurrences to Aveo Engineering as the ETSO holder. The form contains the Aveo Engineering telephone number and the occurrence e-mail address (occurrence@aveoengineering.com).
Page 10
2. Examine the individual LEDs as per the diagram below. If any of the conditions as indicated on the diagram are exceeded, the light shall be removed and sent to Aveo Engineering for replacement under the Aveo Lifetime Warranty Program.
Need help?
Do you have a question about the NEBULON AVE-WPR-51G-401 and is the answer not in the manual?
Questions and answers