Sanyo MPR-1014 Specification Sheet

Specifications
Model No. MPR-514 / 514R
Temperature range
External dimensions 900 x 600 x 1790
[W x D x H] mm (inch) (35.4" x 23.6" x 70.5")
Interior dimensions 800 x 465 x 1300
[W x D x H] mm (inch) (31.5" x 18.3" x 51.2")
Effective capacity 489 liters (17.3 cu.ft.) MPR-514
486 liters (17.2 cu.ft.) MPR-514R
Exterior cabinet
Interior cabinet
Outer door
Cabinet insulation
Outer door lock
5 polyester-coated wire shelves
Shelves & Sliding racks
Load: 50kg per shelf (MPR-514)
5 polyester-coated wire shelves
Load: 20kg per shelf
5 polyester-coated sliding racks
Load: 20kg per rack (MPR-514R)
Cooling method
Evaporator
Condenser Wire and tube, Tube on sheet
Compressor Hermetic type, output: 200W
Refrigerant R-134a (HFC)
for cooling For cooling: output 3W x 1
Fan motor
for condensing
Defrosting
Defrost heater
141kg (300lbs) MPR-514
Net weight
147kg (313lbs) MPR-514R
Dimensions
MPR-514
900 658
800 (inside) 8 600 50
158 150 50
(duct)
300
465
415
Front elevation End section
• Appearance and specifications are subject to change without notice.
Caution: SANYO guarantees the product under certain warranty conditions. SANYO in no way shall be responsible for any loss of content or damage to content.
Options
• Automatic Temperature Recorders
MTR-G04 (Circular Type) MTR-0621LH (Strip Chart Type)
Recording Paper RP-G04
Recorder Mounting Kit MPR-S7
SANYO Electric Co., Ltd., Biomedical Division, Gunma is certified for:
Quality management system: ISO9001 / Medical devices quality management system: ISO13485 / Environmental management system: ISO14001
RoHS (European Restriction of Hazardous Substances directives) compliant
Distributed by:
MPR-1014 / 1014R
2°C to 14°C (Ambient temperature -5°C to 35°C)
1800 x 600 x 1790
(70.9" x 23.6" x 70.5")
1700 x 465 x 1300
(66.9" x 18.3" x 51.2")
1033 liters (36.4 cu.ft.) MPR-1014
1029 liters (36.3 cu.ft.) MPR-1014R
Galvanised steel with baked on finish
Stainless steel
2 sliding doors
Double layer glass with heat reflection film
Rigid polyurethane foamed-in-place (HCFC free)
1
10 polyester-coated wire shelves
Load: 50kg per shelf (MPR-1014)
5 polyester-coated wire shelves
Load: 50kg per shelf
10 polyester-coated sliding racks
Load: 20kg per rack (MPR-1014R)
Forced cool air circulation
Fin and tube
Fin and tube
Hermetic type, output: 250W
R-404A (HFC)
For cooling: output 3W x 2
––
For condenser: output 4W
Forced type, fully automatic
73.8W x 2 141W
243kg (536lbs) MPR-1014
255kg (562lbs) MPR-1014R
MPR-1014R
1800 9
1700 (inside) 150
158 158
(duct) (duct)
Front elevation End section
• External mounting Power Failure Alarm
MPR-48B
RP-06
• SANYO DAQ (Data Acquisition) System
MPR-S30
MTR-480/MTR-2000/MPR-48B (as mounting bracket)
SANYO Electric Co., Ltd.
Biomedical Division
http://www.sanyo.co.jp/cmg/biomedical
©2008 SANYO Printed in Japan 2008.12 MA
SHR130
659
600 50
50
300
465
415
(Unit : mm)