Polar Electro Evaporative Operating Instructions

Operating Instructions: Polar Evaporative Cooling Vest

Activation of the Evaporative Cooling Vest:

To activate the Polar Evaporative Cooling Vest, submerge in water for 1-2 minutes.
After submerging the vest, gently squeeze out excess water. The vest is ready to use and
will remain hydrated for several hours, depending on weather conditions.
To "recharge" vest, simply repeat the instructions above.

General Information

Polar Evaporative Cooling Vest Polar Evaporative Accessories

Product Overview:

Vest is made from a quilted nylon outer layer with a special inner Polar cooling fabric.
This lightweight vest is ideal for cooling in low humidity climates. The Evaporative
Cooling Vest comes in blue or khaki and zips for easy closure.
The Polar Evaporative Safety Vest comes in Class I ANSI compliant high visibility yellow
with 3M reflective tape and uses snaps for easy closure.

Lifespan:

100 wet/dry cycles; after the first 5-10 wet/dry cycles, there may be a noted decline in
the absorption of water. This decline is normal and due to the settling of fibers. The
fabric is still very effective and will not change the duration of cooling.

How to Wear the Vest:

The vest can be worn as the outer garment over a shirt or uniform. The clothing under
the vest will remain dry due to a protective waterproof lining.
Polar Products, Inc. 3380 Cavalier Trail Stow, OH 44224
Ph: 800-763-8423 Email: polar@polarproducts.com
Polar Evaporative Safety Vest