Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vertex Wireless VW450
Summary of Contents for Vertex Wireless VW450
- Page 1 V.1.4E p a g e...
- Page 2 p a g e...
-
Page 3: Table Of Contents
1. INSTALLATION GUIDE 1.1. FRONT, SIDE AND REAR VIEW OF VW450 1.2. CHECKING THE COMPONENTS 1.3. SIM CARD INSTALLATION 1.4. BATTERY INSTALLATION 1.5. INSTALLATION OF THE ANTENNA AND LOCATION OF THE EQUIPMENT FOR VOICE SERVICE 1.6. DESKTOP INSTALLATION 1.7. WALL MOUNTING 2. - Page 4 4.12. AUTOMATIC PIN ENTERING 4.13. FACTORY RESET 4.14. VOICEMAIL INDICATION 5. SUPPLEMENTARY SERVICE FEATURES 5.1. CALL FORWARDING 5.2. CALL BARRING 5.3. CALL WAITING 5.4. SIM SECURITY CODES 5.5. CALLER ID 6. DATA SERVICE FEATURES 7. FAX SERVICE FEATURE 7.1. ANALOG FAX 7.2.
- Page 5 Welcome to your VW450 VW450 is a Fixed Wireless Terminal designed to provide better wireless connectivity between wire telephone and GSM 850/900/1800/1900 band network with high sensitivity to receive signal and large transmitting power to expand extensively the effective coverage of GSM service.
- Page 6 Do not use VW450 in the hospital. It will interfere with medical electronic equipments such as a peace maker. Do not use harsh chemicals, cleaning solvents to clean VW450. And wipe with a soft, clean, dry cloth to clean it.
-
Page 7: Installation Guide
Installation guide 1.1. Front, Side and Rear View of VW450 p a g e... -
Page 8: Checking The Components
1. MAIN UNIT 2. USER MANUAL 3. LI-ION BACKUP BATTERY 4. DC POWER ADAPTER 5. CABLE FOR GPRS CONNECTION (VW450): OPTIONAL ACCESSORY 6. ANTENNA AND THE CABLE WITH THEIR SUPPORT (YOU SHOULD COUPLE THE ANTENNA IN THEIR SUPPORT) p a g e... -
Page 9: Sim Card Installation
1.3. SIM card installation 1. Disconnect the power supply. 2. Open battery cover on the bottom side of the VW450. 3. Disconnect the DC power cable to VW450 4. Take out the battery pack in the right position between the hold bars 5. -
Page 10: Battery Installation
1.4. Battery installation 1. Disconnect the power supply. 2. Open battery cover on the bottom side of VW450. 3. Connect the DC power cable to VW450. 4. Close the battery cover. 5. Connect the power supply to VW450. 10 |... -
Page 11: Installation Of The Antenna And Location Of The Equipment For Voice Service
* Notices: make sure of pressing the antenna completely to their connector in the terminal. 2. Using the marked port as “Phone “connects the VW450 to the central PBX, or to the system of tariff of the booth or a similar telephone. If their Terminal is model VW450 and you will use similar fax, connect the fax machine to the port “Fax ". - Page 12 IF THE PIN OF THE SIM CARD (CHIP) IT IS ACTIVATED AND SHE/HE IS NOT CARRIED OUT THE PREVIOUS PROCEDURE CORRECTLY, THE SIM CARD WILL BE ABLE TO BE BLOCKED AND YOU WILL HAVE TO ENTER THE NUMBER PUK TO UNBLOCK IT (TO CONSULT SECTION 4.9).
-
Page 13: Desktop Installation
(See 2.1 LED Status Indicator section) 7. If you use Data Service or PC FAX Service, connect your data cable to the Data port located at the side of VW450. 8. If you use G3 FAX machine, connect your line cord of G3 FAX to the RJ-11port located at the side of VW450. -
Page 14: Wall Mounting
1.7. Wall mounting 1. Mark two mounting hole locations to match the screw hole in the back of VW450. 2. Drill two holes at the marked locations. 3. Tighten the screws until the head is about 3~5mm from the wall. -
Page 15: Getting To Know Vw450
Getting To Know VW450 LED Status Indicator When your VW450 is powered on, the LED Status Indicators show operation of the indicators and the modes. When your VW450 is turned on, the LED Status Indicators show operation of power status, signal strength and current mode. - Page 16 4) EXCEPTION STATUS LED Activity Description ALL LED Flashing(Red) then Insert SIM Mode LED : GREEN ALL LED Flashing(Red) then Equipment Locked, Enter Lock Code Signal LED : GREEN (See 4.8 Equipment Lock section) ALL LED Flashing(Red) then PIN Locked, Enter PIN Signal LED : AMBER (See 4.9 PIN Lock section) ALL LED Flashing(Red) then...
-
Page 17: Basic Operations
2. Pick up the handset of the phone. 3. If you listen for dial tone, dial the desired telephone number. The call will be automatically made by VW450. If you hear fast beep tone, check SIM card or signal strength. -
Page 18: Basic Settings
# * 100 * <level> # level : 1 - 7 4.2. Dial Delay Time You can set dial delay time that your VW450 waits after the phone number is dialed before automatically sending the number. Set Dial Delay Time # * 101 * <delay>... -
Page 19: Cid Format
The lock code prevents VW450 from being used by unauthorized person without your permission. The default lock code is 0000. When equipment lock is activated, you must enter lock code using ‘Enter Lock Code’ string every time the VW450 is turned on. (See 2.1 LED Status Indicator section) Activate # * 109 * 1 * <password>... -
Page 20: Pin Lock
The PIN can be between 4 and 8 digits in length and any combination of digits 0 to 9. When PIN lock is activated, you must enter the PIN using ‘Enter PIN’ string every time the VW450 is turned on. -
Page 21: Dtmf Tone Generation
4.12. Automatic PIN Entering You do not need to enter the PIN upon power up if it is stored in VW450 – the PIN is entered automatically. This function is convenient in case of power failure; VW450 would be operable in a short time after power recovery without any intervention by the operating staff. -
Page 22: Supplementary Service Features
Supplementary Service Features 5.1. Call Forwarding An incoming call can be delivered to another telephone number programmed. Please contact your service provider for availability. 1) All Calls You can send all incoming calls to a different number using this feature. Activate &... -
Page 23: Call Barring
4) Busy When your account is Busy, You can send all incoming calls to a different number. Activate * * 67 * <Number> # Flash Deactivate # # 67 # Flash 5) All Types To deactivate all type of ‘Call Forwarding’ feature, Deactivate ## 002 # Flash 5.2. - Page 24 4) Bar all outgoing calls Does not allow all outgoing calls, but still wish to receive incoming calls at any time. Activate * 333 * PIN # Flash Deactivate # 333 * PIN # Flash 5) Bar all Incoming Calls Does not allow all incoming calls but still wish to make outgoing calls at any time.
-
Page 25: Call Waiting
9) Deactivate all call barring Deactivate # 330 * PIN # Flash 5.3. Call Waiting Call Waiting is a feature, which enables you to be alerted to another incoming call while you are on the call of your telephone. These features are network-dependent. Contact your service provider to activate or deactivate Call Waiting. Activate * 43 # Flash Deactivate... -
Page 26: Sim Security Codes
5.4. SIM Security Codes The SIM card has a PIN to prevent VW450 from being used by unauthorized person without your permission. You can set this features and also change SIM card PIN. Ask your service provider for more information. -
Page 27: Data Service Features
FAX MACHINE SHOULD BE CONNECTED Note: Every fax machine has settings to communicate in specific country. If you have a problem of transmission between VW450 and local fax machine, you can change the national configuration of VW450 by pressing dial #*302*2#. The setting is originally configured... -
Page 28: Digital Fax
SIM, but after performing this national-setup VW450 will automatically find out the correct setup. Note: After failure of sending faxes due to network problem or not working fax line, VW450 tries to transmit twice more to designated fax machine. If the transmission was not successful in spite of 3-tries, you will receive error report. -
Page 29: General Information
General Information 8.1. Specifications MAIN UNIT Item VW450 Frequency range GSM850, GSM900, DCS1800, PCS1900 Protocol GSM , GPRS Class B Multi connection 5 REN Connection port RJ11 port(For Phone/Fax), Serial port(Data/Fax) Size(mm) 158X112X26.4 Weight About 268g with a standard battery Environment temperature: -10℃... -
Page 30: Additional Safety Information
Serial number ready for quicker service. EVERYDAY USE OF YOUR VW450 Do not touch the antenna unnecessarily when your VW450 is in use, as this will affect call quality and may cause VW450 to operate at a higher power level than otherwise needed. - Page 31 OPERATING ENVIRONMENT Remember to follow any special regulations in force in any area, and always turn off your VW450 wherever it is forbidden to use it, or when it may cause interference or danger. EXPLOSIVE ATMOSPHERES AND MATERIALS Turn your VW450 off and do not remove the battery when in any area with a potential explosive atmosphere and obey all signs and instructions.
-
Page 32: Guarantee
Check for the appropriate service indication on the LED. Make sure VW450 powered on properly. Telephone service is not Working Check any equipment connected to the VW450 is correctly connected. Make sure your service is established with a service provider. Check the appropriate power indication on the LED Call can not be received. -
Page 33: Conformance Statements
- MODEM SETUP WIZARD CD(IT IS SUPPLIED TOGETHER WITH USB DATA CABLE.) IF YOU USE VERTEX WIRELESS MODEM SETUP WIZARD, DATA CONNECTION WILL BE EASILY SET UP. NOTE : THIS MANUAL IS FOR WINDOWS XP. SETTING IN OTHER WINDOWS VERSIONS IS SIMILAR. - Page 34 FCC ID: XAVVW450 Warning: Exposure to Radio Frequency Radiation The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should not be less than 100 cm during normal operation.
- Page 35 35 | p a g e...
Need help?
Do you have a question about the VW450 and is the answer not in the manual?
Questions and answers