Attaching The Stand Base - Panasonic TY-ST32PE1 Operating Instructions Manual

Assembly Procedure

2. Attaching the stand base

1) Place the stand base
with those on the rear panel of the display.
2) Fix it firmly with the 4 display installation screws
● Tightening torque guideline: 1.2 to 1.5 N•m
Note
● Be sure to use the specified hole positions to attach the
stand base.
3. Attaching the stand leg
1) Align the holes of the stand legs
stand base .
● One of the stand legs is for the right side, and the
other is for the left side.
See the incised marks on the stand legs to check the
correct positions.
● Be careful not to drop.
2) Fix the stand legs firmly with the 4 stand leg
mounting screws
● Tightening torque guideline: 1.2 to 1.5 N•m
3) To stand the display vertically.
10
, aligning the screw holes
with those of the
.
(Cont'd)
Stand base
Display installation screw
.
R
Stand leg (R)
Stand base
L
Stand leg mounting screw
Stand leg (L)