Silencer Security Systems 4901 Owner's Manual

Vehicle immobilizer

Table of Contents

Download this manual

4900UMRevD

7/30/04

4:58 PM

Page 1

O W N E R ' S

M A N U A L

Model: 4900/4901

Vehicle Immobilizer

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference; and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to

this equipment. Such modifications could void the user's authority to operate the equipment.

Table of Contents

Need help?

Do you have a question about the 4901 and is the answer not in the manual?

Page 1 Page 1 O W N E R ’ S M A N U A L Model: 4900/4901 Vehicle Immobilizer This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 2 4900UMRevD 7/30/04 4:58 PM Page 2 Welcome to the world of Silencer automotive security. Silencer products have been designed to provide the con- sumer with a product that is technologically superior, providing years of trouble free operation. This manual will provide reference for the operation and maintenance of your new Silencer vehicle immobilizer system.
Page 3 When this Silencer model is armed, the engine will crank over but it will not run normally. This is how to identify a 4901 system. If you have this type of system, perform the following procedure to activate the override function: CAUTION: If you have a 4901 system installed, cranking the engine for more than 5 seconds may cause the “Check Engine”...
Page 4 4900UMRevD 7/30/04 4:58 PM Page 4 System Maintenance The only maintenance that your Silencer engine immobilizer requires is a periodic check to insure that all operations are functioning normally. This is also good practice for you to refresh your memory on “Emergency Override”...

4900