6.0
INSTALLATION GUIDE
In Europe, for example, gas appliances, cable laying, installation of gas
cylinders, as well as approval and checking for leaks must comply with
DIN EN 1949 for liquid gas units in vehicles.
6.1
Installation
The appliance may only be installed by authorised personnel.
Installation and connection of the appliance must comply with the latest
technical regulations, as follows:
Technical regulations, liquid gas (TRF 1996)
Technical regulations, DVGW Worksheet G 607 (DIN EN 1949)
Technical regulations, EN 732
The electrical installation must comply with national regulations
( EN 60335-1 for Europe).
The gas installation must comply with national regulations.
Local and building control department requirements
The appliance shall be installed in such a way that it is shielded from
excessive heat radiation.
Side Installation
6.1.1
Rear installation
6.1.2