Sanyo PLC-XW56 Owner's Manual page 29

Display area H
Press the Point buttons to adjust the horizontal
◄►
area displayed by this projector.
Display area V
Press the Point buttons to adjust the vertical area
◄►
displayed by this projector.
Reset
To reset the adjusted data, select Reset and press
the SELECT button. The confirmation box appears
and then select [Yes]. All adjustments return to their
previous figures.
Mode free
To clear the stored data, select Mode free and press
the SELECT button. Move the red arrow pointer to
the Mode that you want to clear and then press the
SELECT button.
Store
To store the adjusted data, select Store and press the
SELECT button. Move the red arrow pointer to any of
Mode 1 to 5 in which you want to store and then press
the SELECT button.
Quit
Exit the PC Adjust Menu.
 Note:
Display area (H/V) cannot be selected when 480i,
575i, 480p, 575p, 70p, 1035i, or 1080i is selected
in the PC System Menu (p.6).
Computer Input
Move the red framed
pointer to an item and
press the SELECT button.
This Mode has stored parameters.
To clear adjusted data
Vacant Mode Values of "Total dots",
"Horizontal", "Vertical",
"Display area H" and
"Display area V".
To store adjusted data
Close this dialog box.
9