Positioning Projector; Adjustable Feet - Sanyo plc-xu33 Owner's Manual

G This projector is designed to project on a flat projection surface.
G The projector can be focused from 3.0'(0.9m) ~ 22.6'(6.9m).
G Refer to the figure below to adjust a screen size.
H1 : H2 = 9 : 1
(0.9m)
34"
Screen Size
(W x H) mm
691 x 518
Zoom (min)
3.0' (0.9m)
Zoom (max) –––––
Picture tilt and projection angle can be adjusted by rotating
ADJUSTABLE FEET. Projection angle can be adjusted up to 15.6
degrees.
1 Lift the front of the projector and pull FEET LOCK LATCHES
on the both sides of the projector.
2 Release FEET LOCK LATCHES to lock ADJUSTABLE FEET
and rotate ADJUSTABLE FEET to adjust the position and tilt.
3 To retract ADJUSTABLE FEET, lift the front of the projector
and pull and undo FEET LOCK LATCHES.
Keystone distortion of the projected image can be adjusted
by Menu Operation. (Refer to P20 and 35.)
CAUTION
Avoid positioning a projector with the angle of more than 20
degrees. Projection Lamp may malfunction.

POSITIONING PROJECTOR

15.1' (4.6m)
11.2' (3.4m)
7.5' (2.3m)
3.0'
100"
84"
40"
34"
40"
813 x 610 2032 x 1524
3.6' (1.1m) 8.9' (2.7m)
3.0' (0.9m) 7.5' (2.3m)

ADJUSTABLE FEET

ROOM LIGHT
The brightness in a room has a great influence on
picture quality. It is recommended to limit
ambient lighting in order to provide the best
image.
22.6' (6.9m)
200"
150"
167"
124"
100" 150"
3048 x 2286
13.5' (4.1m)
11.2' (3.4m)
ADJUSTABLE FEET
PREPARATION
300"
Max. Zoom
249"
Min. Zoom
H1
H2
200" 300"
4064 x 3048 6096 x 4572
18.0' (5.5m) –––––
15.1' (4.6m) 22.6' (6.9m)
FEET LOCK
LATCHES
9