Jumper T12 Quick Start Manual

Thank you for purchasing the Third-generation Jumper
T12 Multi-protocol Radio system. Jumper is proud to bring
this ground-breaking product to the market and would like to thank
customers just like you and the community for making this dream
possible.
Please take a moment to read this quick start reference before using
your new T12 radio.
Happy flying!
-The Jumper Development team.
Many radio control models are equipped with powerful motors and sharp spinning propellers. Please exercise caution when
working on models. Ensure power is disconnected from your models and remove propellers when performing maintenance.
Do not operate the T12 radio system under the follow conditions.
•
During bad weather or high wind conditions such as rain, hail, snow, storms or electromagnetic events.
•
During any conditions of limited visibility.
•
In areas where people, property, powerlines, roads, vehicles or animals may be in present.
•
If you are felling tired or unwell or under the influence of drugs or alcohol.
•
If the radio or model appear to be damaged or not functioning correctly.
•
In areas of high 2.4ghz interference or in locations where use of 2.4ghz radios is prohibited.
•
When the battery is the T12 or the model is too low to function.
The T12 is are shipped with OpenTX software installed as standard. To download the latest Software manual please visit
https://opentx.gitbooks.io/manual-for-opentx-2-2/
To download the latest firmware for your radio please visit the Deviation TX website at the following link.
https://www.open-tx.org/downloads
CAUTION!
The T12 is shipped with the most stable firmware at the time of manufacture. Please only update firmware if you
are experienced and confident in updating system firmware. Incorrect updates may render the radio inoperable.