Information; Input Source Information Display - Sanyo PLC-XK2600 Owner's Manual

The Information Menu is used for checking the status of the image signal being projected and the operation of the
projector.
Direct Operation
Press the INFO. button on the remote control to display
the Information Menu.
Menu Operation
Press the Point ▲▼ buttons to select the Information.
The Information Menu is displayed.
See below for displayed information.
Input
The selected input source is displayed.
H-sync freq.
The horizontal frequency of the input signal is
displayed in KHz, or - - - - KHz when no signal.
V-sync freq.
The vertical frequency of the input signal is displayed
in Hz, or - - - - Hz when no signal. Numbers of Hz
doubles when during Interlace.
Screen
The selected screen size is displayed.
Language
The selected language is displayed.
Lamp status
The selected lamp mode is displayed.
Lamp counter
The cumulative lamp operating time is displayed.
Power management
Off, Ready or Shut down, and Timer are displayed.
Key lock
The selected Key lock icon is displayed.
PIN code lock
Off or On1 or On2 is displayed.
Remote control
The selected remote code is displayed.
SERIAL NO.
The serial number of the projector is displayed. The
serial number is used to service the projector.

Information

Input Source Information Display
Remote Control
Information Menu
INFO. button
57