Optimisation Functions; Locking The Interface - Honeywell T6 User Manual

Overriding a program schedule (continued)
Permanent Hold
1. Touch
1004
210
2. Touch
3. Touch
Geofencing
Your new T6/T6R Smart Thermostat supports location-based scheduling
which can intelligently override the time-based schedule. If your schedule
varies or you regularly depart and return at different times, the Thermostat
can automatically adjust to your life. No rigid scheduling. No learning period.
Just comfort when you're home and savings when you're away.
When you enable the geofence schedule in the Honeywell Home App, it
intelligently controls your heating based on whether you are home or away.
• Active geofence schedule is indicated by
screen. Home/Away/Sleep status is indicated by
• To learn more about configuring the geofence schedule, see
'Create New Schedule' menu in your Honeywell Home App.
• To learn more about how smart geofencing can work for you and how
it fits to your busy lifestyle, go to getconnected.honeywell.com
to deactive the schedule
and activate a permanent hold.
or to adjust temperature.
to cancel the Permanent Hold
and resume the regular schedule.
in the top left corner of the
, or .
12
Heating optimisation functions
Your T6/T6R Smart Thermostat has several heating optimisation functions. These
functions aim to save energy while making you as comfortable as possible.
Configure these options via the OPTIMISE menu on your Thermostat.
• Optimum Start
Over time, the Thermostat learns how long it takes your system to
reach the temperature you want. It turns on the heating or cooling
system earlier to make sure you're comfortable at the time you expect.
The Thermostat displays when it turns the system on early.
• Optimum Stop
Saves energy and money by switching off a little bit earlier than the normal
programmed time. If your home is up to temperature, you will not notice the
effect on the temperature, but you will see a difference in your fuel bill.
• Delayed Start
Saves energy by slightly delaying the start of heating depending on the difference
between the programmed temperature and the actual room temperature.

Locking the interface

Your T6/T6R Smart Thermostat has a lock function, which can
restrict access to the Thermostat interface in two levels:
• PARTIAL: Allows changing the setpoint temperature only
• FULL: Restricts all access to the Thermostat interface
When the function is activated a PIN is given to unlock
the thermostat - take note of the PIN.
13