GMC 2019 TAHOE 4x4 Special Service Manual page 2

Ab ou t This Pu b licat io n

This catalog is not updated during the model year and should not be used for

ordering purposes. It is intended as a source of basic information. All illustrations

and speciﬁcations in this literature are based on the latest product information

and specifications in this literature are based on the latest product information

available at the time of publication. General Motors reserves the right to make

changes at any time without notice. For further details, consult your local dealer.

Care must be taken during customer installation of equipment and wiring to

ensure that all holes drilled in the body are corrosion protected, properly sealed

and that vehicle wiring harnesses, piping or other components have not been

displaced or damaged. Aftermarket equipment installers must be mindful of

applicable Federal Motor Vehicle Safety Standards. This information can be

obtained directly from the National Highway Traffic Safety Administration.

obtained directly from the National Highway Trafﬁc Safety Administration.

Adding non-dealer accessories or making modiﬁcations to the vehicle can affect

Adding non-dealer accessories or making modifications to the vehicle can affect

vehicle performance, aerodynamics, and overall top speed.

These vehicles are equipped with an airbag system. The airbag system in your

police vehicle includes frontal driver and front outboard passenger airbags,

police vehicle includes frontal driver and outboard front passenger airbags, front

outboard seat back side impact airbags, front outboard knee airbags and, side

front seat back side impact airbags, roof rail mounted head-curtain airbags and

if available, front knee airbags or knee bolsters. Customer installed equipment

curtain airbags, and if available, front knee airbags or knee bolsters. Customer

such as security barriers behind the front seats should not be mounted

installed equipment such as security barriers behind the front seats should not be

so that the barrier ends are within the side airbag deployment zones. The sensors

mounted so that the barrier ends are within the side airbag deployment zones. The

and other components for the airbag system must not be relocated to

sensors and other components for the airbag system must not be relocated to

accommodate the installation of customer furnished equipment; please refer to

the service manual for sensor and other component locations. For information

concerning instrument panel top pad mounted equipment and airbag system

deployment zones, see the airbag information section in this catalog and the

vehicle owners manual.

A note about vehicle alterations by independent suppliers: This catalog shows

pictures of vehicles that have been altered or upﬁtted with equipment or

pictures of vehicles that have been altered or upfitted with equipment or

components supplied to Chevrolet or its dealers by independent suppliers.

Chevrolet is not responsible for the safety or quality of design features, materials

or workmanship of any alterations by a supplier.

trademarks of General Motors LLC.

Table of Contents