Option Buttons - LG WT7100C Series Owner's Manual

28 OPERATION

Option Buttons

Your washer features several additional cycle options
that customize cycles to meet your individual needs.
To use these options, select the desired option after
selecting the desired cycle.
After selecting the desired cycle and settings, press
the cycle option button(s) for the option(s) you would
like to add. The button will light when that option is
selected. If the selected option is not allowed for the
selected cycle, the chime will sound twice to alert you
and the LED will not illuminate.
NOTE
• To protect your garments, not every feature is
available with every cycle.
Spin Only
Use this option to drain the water from the tub and
spin the clothes. This can be used, for example, if the
wash cycle is interrupted by a power failure. The spin
speed can be adjusted using the Spin button.
• To use this option, do not select a cycle.
1
Press the Power button to turn on the washer.
2
Press and hold the Spin button for 3 seconds.
3
Press the Start/Pause button.
Cold Wash
This option saves energy by using cooler water while
increasing the wash and rinse times to maintain wash
performance.
NOTE
• Wash time will increase up to several minutes with
this option.
• For best wash results, only wash small loads (less
than 8 lb.) with this option.
Signal
The washer plays a melody when the wash cycle
is finished. The buttons make a sound each time
a button is pressed. Use this option to adjust the
volume of the melody and button tones.
• Press and hold the Cold Wash button for 3
seconds to adjust the volume of the signal.
• Press the button repeatedly to adjust the volume of
the melody.
• When no signal is heard, the signal is off. The
volume settings are Off or On. The signal volume
can be adjusted at any time as long as the washer
is turned on.
Delay Wash
Once you have selected the cycle and other settings,
press this button to delay the start of the wash cycle.
Each press of the button increases the delay time by
1 hour, for up to 19 hours. Once the desired delay
time is set, press the Start/Pause button to start the
delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer will automatically shut off
after 60 minutes and all cycle settings will be lost.
Rinse+Spin
Select this option to rinse and spin a load separately
from a regular cycle. This can be helpful in preventing
fresh stains from setting in fabrics.
• You can change the spin speed by pressing the
Delay Wash button.
• To use this option, do not select a cycle.
1
Press the Power button to turn on the washer.
2
Press and hold the Delay Wash button for 3
seconds.
3
Press the Start/Pause button.