Table of Contents
Advertisement
DESCRIPTION OF THE MACHINE
The ORO PLUS is a compact, fully fitted sandblaster combining practical and ergonomic
design to competitive price. ORO has been studied to remove investment particles as well
as to carry out satin-finishing operations utilizing the suitable abrasive for use in the
Dental, Gold and Jewellery field, thus emphasizing reliability and ease of use of such
blasting unit.
The unit is pre-arranged to be quickly and easily connected to the WAFIS dust suction and
filtration system (exclusive patent by DENTALFARM), code A1021S or to PRO-3 (A1501)
and PRO-3 SHAKE (A1502) extractors.
OPERATING INSTRUCTIONS
/!\ ATTENTION: The sandblasting process originates toxic dust which in no way
• Place the machine on the work bench.
• Plug in (37) to an approved earthed 220v AC current socket.
• Assemble on the pressure reducer (42), the pipe-fitting most suitable to the pipe-line
used in the Laboratory (if in rilsan or polyethylene 8x6, screw the quick clutch - 40; if in
rubber 12x6, screw the pipe-fitting - 41 and tighten by means of a hose clamp).
• Connect the pedal control on the pipe-fitting (23) located on the front of the working
chamber, following the different colors.
• Fill the working chamber with the appropriate abrasive according to the operations to be
carried out (apprx. Kg 6,0) as specified in the above table:
Name
CROMCOR
AP036
OROCOR
AP046
SUPERCOR
AP060
OROBLAST
AP300
• To connect the WAFIS dust filtering system patented by DENTALFARM, or any other
similar system, it is sufficient to introduce the suction pipe (11) on the flange (10) - (it is
also possible to fit a pipe with internal ∅ 30 or 40 mm). Plug in the electric feeding of the
extractor to the socket (21), assuring the automatic operation.
must be inhaled by the Technician. For this reason, it is absolutely
forbidden to operate the machine if a proper suction system has
not been previously connected to the sandblaster.
Code
Description
Brown corundum grainsize 36 (µ 500 appr.) for chrome-cobalt
(may be used with nozzle ∅ 3,5 on request) pressure 4/6
BAR
White corundum grain 46 (µ 350 appr.) for non-precious alloys
(may be used with standard nozzle ∅ 3,0) pressure 4/5 BAR
White corundum grainsize 60 (µ 250 appr.) for precious alloys
(may be used with standard nozzle ∅ 3,0) pressure 3/4 BAR
Glass-beads - µ 200 – for the satin-finishing of any metal
(may be used with standard nozzle ∅ 3,0) pressure 3/4 BAR
Advertisement
Table of Contents
