Table of Contents
Advertisement
-
SEND (cont.)
ADRS
Invalid Address. If this bit is set to a 1, an invalid IEEE488
device address was given.
example
This example shows how to send data from a KM488-ROM to a device.
The KM488-ROM is inttialized as a System Controller located at GPIB
address 10. The KM488-ROM uses high-speed handshaking. The data
(a device setop string) is sent to a device located at GPIB address 2.
#inolud.~4ssrom.h>
tin0
I
irat a&.-12,
.t*t-0;
usage
alternate usage
parameters
SETBOARD
In multiple board system, identifies the Kh4488-ROM to be
programmed.
. . .
int
board:
1..
*ckboard (board) ;
.
board is an lNTEGER between 0 and 3 representing the board to be
programmed. Note that up to four boards install in any one system. The
board "number" is associated with the base address of its I/O port.
1
7-16
KM-488~ROM USER GUIDE
Advertisement
Table of Contents
