Advertisement
1000BASE-T copper SFP transceiver
The Copper Small Form Pluggable (SFP) transceivers is high performance, cost effective module
compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and
IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-
pair CAT 5 cable. The module supports1000 Mbps (or 10/100/1000Mbps) full duplex data-links with 5-
level Pulse Amplitude Modulation (PAM) signals.
Feature
Up to 1.25Gb/s bi-directional data links ;
Hot-pluggable SFP footprint ;
Extended case temperature range (0°C to +70°C );
Fully metallic enclosure for low EMI;
Low power dissipation (1.05 W typical);
Compact RJ45 connector assembly;
Access to physical layer IC via 2-wire serial bus;
1000 BASE-T operation in host systems with SERDES interface.
10/100/1000Mbps compliant in host systems with SGMII interface
Board diagram
Installation step
Please check the following items before installation. If any missing, please contact the dealer.
1000BASE-T copper SFP transceiver
User manual
Please follow the following step
)
1 Plug
the
l module into SFP socket;
)
2 Check if the installation is correct and device is good, make sure all the connection is
reliable and power up the system;
3) Make sure the optical communication is normal.
1
1pc
Advertisement
