Download Print this page

National Instruments RMX-10051 User Manual page 3

Advertisement

When the DC output feature is included, it draws power from the AC mains, and affects the
available AC Output power. DC output ratings are shown in the following table.
Table 4. RMX-10050/10051 Family DC Output Ratings
DC
Power
Channel
Capacity
DC1
125 W
DC2
125 W
DC3
125 W
DC4
125 W
All models, except the RMX-10050 (785342-01), include a DC output
Note
feature. The total DC Output is always limited to 500 W. This is divided evenly as
125 W per each of the four output channels.
Safety
This product is intended for indoor use only and should not be exposed to excess moisture.
This product is intended for installation in a restricted access location by a skilled person.
This product is intended for use by an instructed person.
This product is classified as pluggable equipment. The mains inlet plug serves as the
disconnect device. The mains inlet plug shall be installed so that it is easily accessible.
This product is equipped with a safety ground connection through the mains inlet plug,
as well as a redundant chassis ground screw on the rear panel. Ensure that the product is
properly grounded before applying power.
Disconnect all power to the product prior to servicing.
Do no open this product as it contains no user serviceable parts inside. All service concerns
should be directed to National Instruments.
The ratings for all output receptacles are marked on the top cover of the chassis. Be sure to
observe the ratings for all connected load equipment.
If this product is used in a manner which does not comply with this instruction manual,
the protection provided by the equipment may be impaired.
Hot Surface
unit has cooled prior to handling.
RMX-10050
(785341-01)
Voltage
12 VDC
24 VDC
24 VDC
48 VDC
Contact with the top cover of chassis may cause burns. Ensure the
RMX-10050/10051 User Guide | © National Instruments | 3
RMX-10051
(785344-01)
Output
Output
Rating
Rating
10.4 A max
12.5 A max
5.2 A max
6.25 A max
5.2 A max
6.25 A max
2.6 A max
3.13 A max
RMX-10051
(785343-01)
Output
Rating
12.5 A max
6.25 A max
6.25 A max
3.13 A max

Advertisement

loading

This manual is also suitable for:

Rmx-10050