Advertisement
Precaution and Compliance
Precaution
CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
- The receiver is precision equipment. Do not drop,
bump, or subject it to strong forces. Doing so may cause
damage or malfunction.
- When transporting the projector, make sure that the
receiver is removed from the projector. Do not transport
the projector with the receiver installed. To do so may
cause damage or malfunction of the receiver or the
projector.
CAUTION IN HANDLING THE RECEIVER
When the receiver is inserted into the projector, the cover
of the receiver protrudes from the cabinet of the projector.
- Do not push or hit the receiver.
- Do not put anything on the receiver.
- Do not hold the receiver when lifting or moving the
projector. Doing so may cause damage to the receiver or
the projector.
Compliance
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the
following two conditions: (1) the device may not cause interference, and (2) the device must accept
any interference, including interference that may cause undesired operation of this device.
CAUTION: Properly shielded a grounded cables and connectors must be used for connection to host
computer and /or peripherals in order to meet FCC emission limits.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
FCC RF Exposure Warning
- This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.
- This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment
and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This
equipment must be installed and operated with at least 20cm and more between the radiator and
person's body (excluding extremities: hands, wrists, feet and ankles).
For Canadian Users
This Class A digital apparatus complies with Canadian ICES-003.
Cet apparei numérique de la classe A est conforme à la norme NMB-003 du Canada.
CAUTION ABOUT RADIO WAVE
This unit operates in 5.2 GHz band, the
same frequency band used for industrial,
scientific, and medical equipment (such
as pacemaker).
Please make sure the following cautions.
1. Be sure that there are no other devices
in the area that may use the same
frequency band as Transmitter.
2. If any other devices are causing radio
interferences, move to other location.
3. Do not set up this unit outside. This
unit operates in 5.2 GHz band, so it is
designated for indoor use only.
WARNING
This is a class A product. In a domestic
environment this product may cause
radio interference in which case the
user may be required to take adequate
measures.
Advertisement
