How Do I Delete A Custom Poi File/Category From My Mio; Image Search; How Do I Search For Navpix™ On The Internet - Mio Pilot Series User Manual

If you want to
enable a visual warning when a
POI of this category is in close
proximity,
select an icon to display on the
Map screen for POIs of this
category,
select the distance from a POI of
this category at which the visual
warning should display or the
warning chime should sound,
enable a warning sound when a
POI of this category is in close
proximity,
select a custom sound alert file to
play when a POI of this category is
in close proximity,
6. Click Add to device to add the POI to your Mio.
Note: Each file corresponds to a POI category; for example, Hotels.csv will be listed on your Mio as the Hotels
category.

How do I delete a Custom POI file/category from my Mio?

1. In the Installed POIs section, click Delete next to the file name. The file is
removed from the list, but is not yet deleted.
2. Accept the warning message. The selected file/category is deleted.

Image Search

Note: This feature is not available on all models.
Image Search is a MioMore Desktop application powered by Flickr™ allowing you
to download photos.
Note: NavPix™ is an image or picture, normally of a location, which contains embedded GPS coordinates
that you can navigate to.
How do I search for NavPix™ on the Internet?
1. Open MioMore Desktop, and then click Image Search.
44
...
Then...
select the Visual alert check box.
click Browse to select the icon file from your local
or network drive.
When you have located the icon file, select it and
click Open.
Note: The icon file must be a bitmap (*.bmp or *.png) graphic with a
minimum size of 6x6 pixels and a maximum size of 32x32 pixels.
Note: If you do not select a custom icon, a default icon will display.
select the distance from the Distance box.
Note: To change the units used to measure distance for this POI
category, from the tools menu click on options and from the general
option select Use metric units check box.
select the Audio alert check box.
● either select a sound file from the list, or
● Click Add to select a sound file (.WAV format)
from your local or network drive. When you
have located the file, select it and click Open.
Note: If you do not select a custom sound file, a default sound alert
will play.