Specifications - Sanyo MPX-CD4 Instruction Manual

SPECIFICATIONS

Signal format
Camera signal input synchronization
Camera input terminals (IN)
Camera output terminals (OUT)
VCR input terminal (VCR IN)
•
Composite input
•
S-VHS input terminal (S-VHS VCR IN)
VCR output terminal (VCR OUT)
•
Composite output
•
S-VHS output terminal (S-VHS VCR
OUT)
Monitor 1 output terminal (MONITOR OUT 1) : VS/VBS, 1.0 Vp-p/75 , BNC connector x 1
Monitor 2 output terminal (MONITOR OUT 2) : VS/VBS, 1.0 Vp-p/75 , BNC connector x 1
Control terminal (CONTROL)
•
Alarm input (1 – 4)
•
Remote input (R1, R2)
•
Alarm output (A)
•
Switching input (S)
•
RS-232C terminal
Full screen sequence timing
Monitor on-screen display
Menu settings
Alarm sensor
Back-up function
Operations
•
Still
•
Zoom
Power
Consumption
Operating environment
Dimensions
Weight
Products are subject to change in design and specifications without notice and without incurring any obligation.
English
: Based on NTSC color signal standard (MPX-CD4)
Based on NTSC B/W signal standard (MPX-MD4)
: Asynchronous
: VS/VBS, 1.0 Vp-p/75 , BNC connector x 4
: Throughput of each input, 1.0 Vp-p/75 , BNC connector x 4
: VS/VBS, 1.0 Vp-p/75 , BNC connector x 1
: Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD4 only)
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 ,
unbalanced
: VS/VBS, 1.0 Vp-p/75 , BNC connector x 1
: Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD4 only)
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 ,
unbalanced
Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD4 only)
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 ,
unbalanced
Camera live picture or VCR playback picture signal output: full screen, sequential
display, 4 divisions split screen
Camera live picture signal output: full screen (can be set in (MONITOR SET) menu
to display the same image as monitor 1)
: No voltage, make-contact switch input x 4 (Low input)
: 2-wire type with resistance-based identification system
: DC 5 V, 5.7 k (Low output)
: Low input, for input signal from SW OUT of timelapse VCR/real time recorder (as
per this manufacturer specifications)
: 9-pin D-SUB
: Available in full screen, 8 settings (1, 2, 3, 4, 5, 10, 20, 30 sec.)
: Title (up to 10 characters), date, time selectable
: 9 menus: Language, Clock, Title, Alarm, Sensor, Timer, Display, VCR, Alarm data
: Internal, 4 channel (each camera input, selectable)
: Back-up for up to 30 days of the clock settings after connected for 30 hours
continuously
: Available for camera live or VCR playback in 4 divisions split screen, full screen and
zoomed in picture
Can be set using a menu to operate automatically when there is an alarm trigger
: Available for camera live or VCR playback in 4 divisions split screen, full screen and
frozen picture
In full screen mode can switch from frozen to zoomed in picture
: AC 120 V, 60 Hz
: 19 W (MPX-CD4), 14 W (MPX-MD4)
: Temperature: 5 to 40˚C, Humidity: 10 to 80%
: 420 (W) x 44 (H) x 325 (D) mm
: Approx. 3.4 kg
39