5
Ports
Model EIR-EXTEND-C provides one Ethernet port over
existing coaxial cable. The extender has two ports, a
RJ-45 10/100Base TX port and the Ethernet extender
port. Existing coaxial cable can be used. If coaxial cable
requires termination, use BNC or F-connectors. F style
will require a BNC to F-Type adapter. When BNC extender
ports on the units are connected, the Lnk LED should be lit.
RJ-45 10/100Base TX Port
BNC Port
6
DIN Rail Clip Detail
Spring loaded DIN
rail clip on back of
Ethernet Extender
Document Number: EIR-EXTEND-C_3117qsg
Recommended Accessories
+ AC Power Adapter (for EIRx Series),
Power Jack, 12VDC, 36W, US Plug
Model# PS12VDC3P (sold separately)
1-888-948-2248 | Europe: +353 91 792444
advantech-bb.com
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 815-433-5100 | Fax: 815-433-5109
www.advantech-bb.com | E-mail: support@advantech-bb.com
QUICK START
GUIDE
Model EIR-EXTEND-C
Ethernet Coaxial Extender
Before you begin, be
sure you have the following:
+ Ethernet Coaxial Extender (requires two,
each sold separately)
+ BNC to F-Type Adapter (included)
+ 12-48 VDC, 6.8W Power Supply (sold
separately)
www.advantech-bb.com
Fast and easy on the web: