Advertisement
Quick Links
Troubleshooting
If there is a condition where data is not
passing the first step is to check the link
LEDs.
Next, make sure that one device is
set to Master and the other to
Remote.
Make sure the setting for duplex is the
same on both the Master and Remote.
Since line noise may be contributing data
transmission interference, check on what
VDSL2 Profile is being used, as you may
have to test the devices under
Symmetrical data rates before returning
to Asymmetrical data rates.
The cable connecting the devices may
be degraded; perform tests with new
cables in a bench test environment.
Document Number: EIS2-EXTEND-A_QSG_1417
Recommended Equipment
CAT 3 phone wire-grade cabling
CAT 5 or higher Ethernet cabling
Included Accessories
DIN rail mount
Panel Mount
RJ-45 to RJ-11 cable
Removable Terminal Block
External AC to DC Adapter
1-888-948-2248 | Europe: +353 91 792444
advantech-bb.com
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 815-433-5100 | Fax: 815-433-5109
www.advantech-bb.com | E-mail: support@advantech-bb.com
QUICK START
GUIDE
EIS2-EXTEND-A
Compact VDSL2 EXTENDERS
Before you begin--
be sure you have the following:
EIS2-EXTEND-A
RJ-45 to RJ-11 cables
Removable Terminal Block
External Power Supply AC to DC
www.advantech-bb.com
Fast and easy on the web:
Advertisement
Related Manuals for B+B SmartWorx EIS2-EXTEND-A
Summary of Contents for B+B SmartWorx EIS2-EXTEND-A
-
Page 1: Troubleshooting
Symmetrical data rates before returning Panel Mount RJ-45 to RJ-11 cable to Asymmetrical data rates. Removable Terminal Block EIS2-EXTEND-A External AC to DC Adapter The cable connecting the devices may be degraded; perform tests with new Compact VDSL2 EXTENDERS cables in a bench test environment. -
Page 2: Product Overview
RJ45 cable to the service equipment. STEP 6： Power on EIS2-EXTEND-A (CO) by connecting the power adapter and Select the DIP Swtich settings based on the VDSL2 then observe the status of VDSL2 Profile for the Master and Remote EIS2-EXTEND-A devices. link LED.