Low Battery; Power On; Power Off; Pairing - LG MSB-100 User Manual

4.2. Low battery

- The LED indicator will blink red when the battery power is low. (Red LED replaces Blue LED as status
indicator.)
- When the battery is not charged, the LED indicator will blink red and then turn off.

4.3. Power on

- Press and hold the PWR/END button for at least 2 seconds.
The MSB-100 will be turned on and a booting tone will play.

4.4. Power off

- Press and hold the PWR/END button for at least 5 seconds.
A shutdown tone will play, the Bluetooth link will be disconnected, and the MSB-100 will be turned off.

4.5. Pairing

- Prior to using the Speaker for the first time, you must pair it with a Bluetooth-enabled handset.
- With the MSB-100 off, press and hold the PWR/END button for 5 seconds.
You will hear four short beeps and the LED indicator will flicker in blue LED and red LED alternately,
when the device enters Pairing Mode.
Using your Handset, find the Bluetooth Menu and "search for" or "add" new devices.
Select "LG MSB-100" from the list of devices and pair it with your handset.
When asked for the Pass/PIN code during the pairing procedure, please enter "0000" (4Zeros).
Once pairing has completed successfully, you will hear a beep.
After pairing successfully, be sure to "Connect" to the MSB-100.
If you want to pair with other devices in the future, the MSB-100 must be in Pairing Mode.
If the MSB-100 is in "Pairing Mode" for 3 minutes without being paired to a device, the Speaker will
automatically turn off.

4.6. Easy pairing

- With the MSB-100 off, Press and hold the PWR/END button for 2 seconds.
If the MSB-100 has ever connected with the Handset, It will try to connect to the handset automatically.
If the MSB-100 doesn't have ever connected with any devices or it fails to connect to the handset by the
several reasons, it will change the mode to pairing mode. The details about pairing mode are described
above (4.5. Pairing) and the connecting sequences are the same.

4.7. Connecting

There are two ways to connect the "MSB-100" to a Handset.
1. Connecting from a Handset to a MSB-100
From the Bluetooth menu, select the "connect" sub-menu.
Page 4