Advertisement
Motogard Relay Models
Series 115
Model No.
115101-2
6 Inputs
Operating
2 Triac Outputs
Characteristics
1 N.O.* 1 N.C.*
Input Rating
120/240 Volts AC
Output Rating
5 amp continuous
Input
Controller ON with 500 ohms
Resistance
or less - OFF with approx.
Control
1500 ohms or more
Over – Temperature Protection System
Controller output, excitation,
Isolation
and sesor input electrically
isolated from each other
Reset
Dimensions
5.50" W x 4.25" L x 3.12"H
Enclosure
Potted in "NEMA" 12 steel case
Copyright 2016 by AMETEK FACTORY AUTOMATION. All Rights Reserved. Made in the USA.
Series 120
120101
3 Inputs
Single Triac Output
N.C.*
120VAC± 10%, Single Phase, 50/60 Cycles
120/240 Volts AC
3 amp continuous
Controller ON with 500 ohms
or less - OFF with approx.
1500 ohms or more
Controller excitation only
isolated from output and
sensors
3.24" W x 2.25" L x 2.50" H
Potted in polyester case
Other Products
MADE IN AMERICA
1080 North Crooks Road, Clawson, MI 48017
Phone: 248-435-0700 Toll Free: 800-635-0289
Fax: 248-435-8120 www.ametekfactoryautomation.com
Series 135
135101
3 Inputs
Form C Relay Output
120/240 Volts AC
or 28 Volts DC
5 amp continuous
Controller ON with 150 to 500
ohms - OFF with approx. 1500
ohms or more
Controller output, excitation,
and sesor input electrically
isolated from each other
Automatic
5.75" W x 2.0" L x 5.68" H
Mounted in welded steel case
* Series 115 and 120 Motogard Controllers use output
Triacs that have been specifically selected to operate
directly in series with main line contactors. If a small
interposing relay must be used, the sealed VA rating
of the interposing relay should be greater than 10VA.
Series 150
150101
1 Input
Form C Relay Output
120/240 Volts AC
4 amp continuous
Controller ON with 150 to 500
ohms - OFF with approx. 3500
ohms or more
Controller output, excitation,
and sesor input electrically
isolated from each other
3.25" W x 2.25" L x 2.50" H
Potted in polyester case
MOTO.M4R
3/18 Z416
Advertisement
