Mcube MC3672 Quick Start Manuals page 14

MC3672 Accelerometer Driver
C2P mode: The current sample and the immediate previous sample are subtracted
generate a delta
C2B mode: The current sample and the first sample captured when entering SNIFF mode
are subtracted to generate a delta.
4.12 CONFIG INTERRUPT MODE
Configure the interrupt mode with:
MC36XX_acc.SetINTCtrl(0,0,0,0,1);
MC36XX have 5 interrupt modes – FIFO_THR | FIFO FULL | FIFO EMPTY | ACQ | WAKE.
These modes can only be enabled separately.
4.13 READ RAW COUNT DATA
Read the raw count data and SI unit measurement with:
MC36XX_acc.readRawAccel();
mCube Proprietary.
© 2018 mCube Inc. All rights reserved.
APS-045-0017v1.2
Quick Start Guide and Demo
14 / 19